INSTALLATION NOTES for OpenBSD/sparc64 3.0 What is OpenBSD? ---------------- OpenBSD is a fully functional, multi-platform UN*X-like Operating System based on Berkeley Networking Release 2 (Net/2) and 4.4BSD-Lite. There are several operating systems in this family, but OpenBSD differentiates itself by putting security and correctness first. The OpenBSD team strives to achieve what is called 'a secure by default' status. This means that an OpenBSD user should feel safe that their newly installed machine will not be compromised. This 'secure by default' goal is achieved by taking a proactive stance on security. Since security flaws are essentially mistakes in design or implement- ation, the OpenBSD team puts as much importance on finding and fixing existing design flaws and implementation bugs as it does writing new code. This means that an OpenBSD system will not only be more secure, but it will be more stable. The source code for all critical system components has been checked for remote-access, local-access, denial- of-service, data destruction, and information-gathering problems. In addition to bug fixing, OpenBSD has integrated strong cryptography into the base system. A fully functional IPsec implementation is provided as well as support for common protocols such as SSL and SSH. Network filtering and monitoring tools such as packet filtering, NAT, and bridging are also standard. For high performance demands, support for hardware cryptography has also been added to the base system. Because security is often seen as a tradeoff with usability, OpenBSD provides as many security options as possible to allow the user to enjoy secure computing without feeling burdened by it. To integrate more smoothly in other environments, OpenBSD 3.0 also provides several binary emulation subsystems (which includes iBCS2, Linux, OSF/1, SunOS, SVR4, Solaris, and Ultrix compatibility), aiming at making the emulation as accurate as possible so that it is transparent to the user. Many new user programs and device drivers have been added in OpenBSD 3.0, as well, bringing it closer to our goal of supplying a complete and modern UN*X-like environment. Tools like perl and an improved ksh are standard, as are numerous other useful tools. Because OpenBSD is from Canada, the export of Cryptography pieces (such as SSH, IPsec, and Kerberos) to the world is not restricted. (NOTE: OpenBSD can not be re-exported from the US once it has entered the US. Because of this, take care NOT to get the distribution from an FTP server in the US if you are outside of Canada and the US.) OpenBSD/sparc64 3.0 is a port to the UltraSPARC processor-based machines, such as the workstations manufactured by Sun Microsystems. This port is in its infancy, so device support is somewhat limited, but active development is continuing. Sources of OpenBSD: ------------------- This is a list of currently known ftp servers as the time of the 3.0 release: Main server in Canada: ftp://ftp.openbsd.org/pub/OpenBSD Argentina: ftp://ftp.openbsd.org.ar/pub/OpenBSD Australia: ftp://ftp.au.openbsd.org/pub/OpenBSD ftp://ftp.it.net.au/mirrors/OpenBSD ftp://ftp.planetmirror.com/pub/OpenBSD ftp://ftp.wiretapped.net/pub/OpenBSD ftp://mirror.aarnet.edu.au/pub/OpenBSD Austria: ftp://gd.tuwien.ac.at/opsys/OpenBSD ftp://mingus.wu-wien.ac.at/pub/OpenBSD Belgium: ftp://openbsd.rug.ac.be/pub/OpenBSD Canada: ftp://ftp.ca.openbsd.org/pub/OpenBSD ftp://gulus.usherb.ca/pub/OpenBSD China (Hong Kong): ftp://ftp.shellhung.org/pub/OpenBSD Czech Republic: ftp://ftp.openbsd.cz/pub/OpenBSD Finland: ftp://ftp.fi.debian.org/pub/OpenBSD ftp://ftp.jyu.fi/pub/OpenBSD France: ftp://ftp.fr.openbsd.org/pub/OpenBSD ftp://ftp.bsdfr.org/pub/OpenBSD ftp://ftp.grolier.fr/pub/OpenBSD Germany: ftp://ftp.de.openbsd.org/pub/unix/OpenBSD ftp://ftp.freenet.de/pub/ftp.openbsd.org/pub/OpenBSD ftp://ftp.gigabell.net/pub/OpenBSD ftp://ftp.leo.org/pub/OpenBSD ftp://ftp.fh-wolfenbuettel.de/pub/os/openbsd Greece: ftp://filoktitis.noc.uoa.gr/pub/OpenBSD ftp://ftp.duth.gr/pub/OpenBSD Hungary: ftp://ftp.fsn.hu/pub/OpenBSD Ireland: ftp://ftp.esat.net/pub/OpenBSD Italy: ftp://ftp.volftp.mondadori.com/mirror/openbsd Japan: ftp://ftp.jp.openbsd.org/pub/OpenBSD ftp://ftp.netlab.is.tsukuba.ac.jp/pub/os/OpenBSD ftp://ftp.kddlabs.co.jp/OpenBSD The Netherlands: ftp://ftp.calyx.nl/pub/OpenBSD ftp://ftp.nl.uu.net/pub/OpenBSD ftp://ftp.nluug.nl/pub/OpenBSD New Zealand: ftp://ftp.nz.openbsd.org/pub/OpenBSD Norway: ftp://ftp.inet.no/pub/OpenBSD ftp://ftp.uninett.no/pub/OpenBSD Peru: ftp://ftp.sajinet.com.pe/pub/OpenBSD Russia: ftp://ftp.chg.ru/pub/OpenBSD ftp://ftp.radio-msu.net/pub/OpenBSD ftp://vell.nsc.ru/pub/OpenBSD Saudi Arabia: ftp://ftp.isu.net.sa/pub/mirrors/ftp.openbsd.org/pub/OpenBSD South Korea: ftp://ftp.snu.ac.kr/pub/BSD/OpenBSD Spain: ftp://ftp.rediris.es/mirror/OpenBSD Sweden: ftp://ftp.luth.se/pub/OpenBSD ftp://ftp.stacken.kth.se/pub/OpenBSD ftp://ftp.sunet.se/pub/OpenBSD Switzerland: ftp://sunsite.cnlab-switch.ch/pub/OpenBSD Taiwan: ftp://openbsd.csie.nctu.edu.tw/pub/OpenBSD ftp://ftp.tku.edu.tw/pub/OpenBS Thailand: ftp://ftp.kmitl.ac.th/pub/OpenBSD United Kingdom: ftp://ftp.knowledge.com/pub/mirrors/OpenBSD ftp://ftp.plig.org/pub/OpenBSD ftp://sunsite.org.uk/Mirrors/ftp.openbsd.org/pub/OpenBSD USA: ftp://ftp1.usa.openbsd.org/pub/OpenBSD ftp://ftp3.usa.openbsd.org/pub/OpenBSD ftp://ftp5.usa.openbsd.org/pub/OpenBSD ftp://ftp7.usa.openbsd.org/pub/os/OpenBSD ftp://archive.progeny.com/OpenBSD ftp://carroll.cac.psu.edu/pub/OpenBSD ftp://download.sourceforge.net/pub/mirrors/OpenBSD ftp://ftp.cse.buffalo.edu/pub/OpenBSD ftp://ftp.groupbsd.org/pub/OpenBSD ftp://ftp.op.net/pub/OpenBSD ftp://ftp.src.uchicago.edu/pub/OpenBSD ftp://ftp.tux.org/bsd/openbsd ftp://gandalf.neark.org/pub/distributions/OpenBSD ftp://mirror.cs.wisc.edu/pub/mirrors/OpenBSD ftp://mirror.csit.fsu.edu/pub/OpenBSD ftp://mirrors.netnumina.com/openbsd ftp://mirrors.rcn.net/pub/OpenBSD ftp://rt.fm/pub/OpenBSD As well, the file ftp://ftp.openbsd.org/pub/OpenBSD/3.0/ftplist contains a list which is continually updated. If you wish to become a distribution site for OpenBSD, contact miod@openbsd.org. OpenBSD 3.0 Release Contents: ----------------------------- The OpenBSD 3.0 release is organized in the following way. In the .../3.0 directory, for each of the architectures having an OpenBSD 3.0 binary distribution, there is a sub-directory. The sparc64-specific portion of the OpenBSD 3.0 release is found in the "sparc64" subdirectory of the distribution. That subdirectory is laid out as follows: .../3.0/sparc64/ INSTALL.sparc64 Installation notes; this file. CKSUM Output of the cksum(1) and md5(1) programs MD5 usable for verification of the correctness of downloaded files. miniroot30.fs A miniroot filesystem image to be used if you for some reason can't or don't want to use the ramdisk installation method. It can be copied to the swap partition of an existing OpenBSD, NetBSD, Linux or Solaris installation to allow installing or upgrading to OpenBSD 3.0. floppy30.fs The standard sparc64 boot and installation floppy; see below. This floppy image will boot on SBus-based sparc64 models, such as: - Ultra 1 - Ultra 2 (not tested) floppyB30.fs Another sparc64 boot and installation floppy; see below. This floppy image will boot on PCI-based sparc64 models, such as: - Ultra 5 - Ultra 10 IMPORTANT! Please note that, as the moment of writing, this floppy image is not working correctly; your mileage may vary. However, it will work correctly when used as a miniroot and booted from the disk's swap area. *.tgz sparc64 binary distribution sets; see below. bsd A stock GENERIC sparc64 kernel which will be installed on your system during the install. bsd.rd A compressed RAMDISK kernel; the embedded filesystem contains the installation tools. Used for simple installation from a pre- existing system. installboot The OpenBSD/sparc64 boot loader installation program bootblk The OpenBSD/sparc64 boot block ofwboot The OpenBSD/sparc64 secondary boot loader ofwboot.net The OpenBSD/sparc64 network boot loader Please note that there are multiple bootable images and kernels, intended to allow installing OpenBSD/sparc64 in a variety of situations without requiring a pre-existing working operating system. The kernel and boot images are provided for net booting installations. Bootable installation/upgrade floppy images: The two floppy images can be copied to a floppy using rawrite.exe, ntrw.exe or `dd', as described later in this document. Each floppy image is a bootable install floppy which can be used both to install and to upgrade OpenBSD to the current version. It is also useful for maintenance and disaster recovery. The OpenBSD/sparc64 binary distribution sets contain the binaries which comprise the OpenBSD 3.0 release for sparc64 systems. There are ten binary distribution sets. The binary distribution sets can be found in the "sparc64" subdirectory of the OpenBSD 3.0 distribution tree, and are as follows: base30 The OpenBSD/sparc64 3.0 base binary distribution. You MUST install this distribution set. It contains the base OpenBSD utilities that are necessary for the system to run and be minimally functional. It includes shared library support, and excludes everything described below. [ 25.0 MB gzipped, 73.6 MB uncompressed ] comp30 The OpenBSD/sparc64 Compiler tools. All of the tools relating to C, C++, and fortran are supported. This set includes the system include files (/usr/include), the linker, the compiler tool chain, and the various system libraries (except the shared libraries, which are included as part of the base set). This set also includes the manual pages for all of the utilities it contains, as well as the system call and library manual pages. [ 21.2 MB gzipped, 81.0 MB uncompressed ] etc30 This distribution set contains the system configuration files that reside in /etc and in several other places. This set MUST be installed if you are installing the system from scratch, but should NOT be used if you are upgrading. (If you are upgrading, it's recommended that you get a copy of this set and CAREFULLY upgrade your configuration files by hand.) [ 1.1 MB gzipped, 3.3 MB uncompressed ] game30 This set includes the games and their manual pages. [ 2.9 MB gzipped, 6.6 MB uncompressed ] man30 This set includes all of the manual pages for the binaries and other software contained in the base set. Note that it does not include any of the manual pages that are included in the other sets. [ 5.6 MB gzipped, 20.3 MB uncompressed ] misc30 This set includes the system dictionaries (which are rather large), the typesettable document set, and man pages for other architectures which happen to be installed from the source tree by default. [ 1.7 MB gzipped, 5.6 MB uncompressed ] xbase30 This set includes the base X distribution. This includes programs, headers, libraries, configuration files. [ 7.6 MB gzipped, 22.7 MB uncompressed ] xfont30 This set includes all of the X fonts. [ 31.4 MB gzipped, 34.1 MB uncompressed ] xserv30 This set includes all of the X servers. There is no X server for real hardware available yet, only the nested and virtual framebuffer servers. [ 4.0 MB gzipped, 10.5 MB uncompressed ] xshare30 This set includes all text files equivalent between all architectures. [ 1.7 MB gzipped, 8.1 MB uncompressed ] OpenBSD System Requirements and Supported Devices: -------------------------------------------------- OpenBSD/sparc64 3.0 runs on the following classes of machines: - SBUS based workstations: Ultra 1 Ultra 1/Creator (should work, but has not been tested) Ultra 2 (should work, but could not be tested) - PCI based workstations: Blade 100 (onboard ethernet has issues) Enterprise 250 Ultra 5 Ultra 10 Ultra 30 SPARCengineUltra AX SPARCengineUltra AXi - faithful clones of the above Sun systems. If your machine is not listed above, it is very likely that OpenBSD/sparc64 does not work on it (yet). The minimal configuration requires 32M of RAM and ~160M of disk space. To install the entire system requires much more disk space, and to run X or compile the system, more RAM is recommended. At the moment, the X window system is not available. Supported devices include: serial ports: Zilog ttya and ttyb (can be used as console if needed), ethernet: on-board AMD Lance ethernet ("le0") SBus AMD Lance ethernet cards PCI/SBus SunSwift and Quad FastEthernet cards (hme, qfe) SBus FastEthernet cards (qec+be) SBus QuadEthernet cards (qec+qe) SCSI: on-board "esp" SCSI controller SBus "esp" SCSI controller (including 3rd party compatibles) framebuffers: on-board framebuffers, (but the kernel will use the OpenPROM console still). Hardware the we do NOT currently support, but get many questions about: Multiprocessor machines Audio drivers Floppy driver (except for booting) FFB (Creator), PGX and AFB (Elite 3D) framebuffers SBus ZX framebuffer (aka Leo) other PCI and SBus cards have not been tested yet. Getting the OpenBSD System onto Useful Media: --------------------------------------------- Installation is supported from several media types, including: CD-ROM FFS partitions Tape Remote NFS partition FTP HTTP If you have the OpenBSD CD-ROM distribution (and a CD-ROM drive), you may be able boot from it. If you can boot from the CD-ROM, you are home free and can proceed to the installation steps. If not, you will need to do some setup work to prepare a bootable image, either a floppy, hard drive, or compatible net boot server. In addition to the bootable image, you also need to consider how to access the binary distribution sets to actually install the system. If you have the OpenBSD CD-ROM distribution you can either access the CD-ROM directly from the bootable image or remotely mounted on another system via NFS. Although you can access the distribution sets directly from the CD-ROM or from one of the FTP mirrors over the internet, you may wish to transfer the sets to a local FTP or NFS server, or copy them to a partition on the target system's disk. Creating a bootable floppy disk using DOS/Windows: First you need to get access to the OpenBSD bootable floppy images. If you can access the distribution from the CD-ROM under DOS, you will find the bootable disks in the 3.0/sparc64 directory. Otherwise, you will have to download them from one of the OpenBSD ftp or http mirror sites, using an ftp client or a web browser. In either case, take care to do "binary" transfers, since these are images files and any DOS cr/lf translations or control/z EOF interpretations will result in corrupted transfers. You will also need to go to the "tools" directory and grab a copy of the rawrite.exe utility and its documentation. This program is needed to correctly copy the bootable filesystem image to the floppy, since it's an image of a unix partition containing a ffs filesystem, not a MSDOS format diskette. Once you have installed rawrite.exe, just run it and specify the name of the bootable image, such as "floppy30.fs" and the name of the floppy drive, such as "a:". Be sure to use good quality HD (1.44MB) floppies, formatted on the system you're using. The image copy and boot process is not especially tolerant of read errors. Note that if you are using NT to write the images to disk, you will need to use ntrw.exe instead. It is also available in the "tools" directory. Grab it and run in with the correct arguments like this "ntrw :" Note that, when installing, the boot floppy can be write-protected (i.e read-only). Creating a bootable floppy disk using SunOS, Solaris or other Un*x-like system: First, you will need obtain a local copy of the bootable filesystem image as described above. If possible use the cksum(1) or md5(1) commands to verify the checksums of the images vs. the values in the CKSUM or MD5 files on the mirror site. Next, use the dd(1) utility to copy the file to the floppy drive. The command would likely be, under SunOS: dd if=floppy30.fs of=/dev/rfd0c bs=36b and, under Solaris: dd if=floppy30.fs of=/dev/rdiskette0 bs=36b unless the volume management daemon, vold(1M), is running, in which case the following command is preferable: dd if=floppy30.fs of=/vol/dev/rdiskette0 bs=36b If you are using another operating system, you may have to adapt this to conform to local naming conventions for the floppy and options suitable for copying to a "raw" floppy image. The key issue is that the device name used for the floppy *must* be one that refers to the correct block device, not a partition or compatibility mode, and the copy command needs to be compatible with the requirement that writes to a raw device must be in multiples of 512-byte blocks. The variations are endless and beyond the scope of this document. If you're doing this on the system you intend to boot the floppy on, copying the floppy back to a file and doing a compare or checksum is a good way to verify that the floppy is readable and free of read/write errors. Note that, when installing, the boot floppy can be write-protected (i.e. read-only). Creating a bootable hard disk using SunOS, Solaris or other Un*x-like system: If you don't have a floppy drive you can copy the floppy installation image "floppy30.fs" or the mini-root "miniroot30.fs" onto the hard disk you intend to boot on. Traditionally, the way to do this is to use dd(1) to place the bootable filesystem image in the "swap" partition of the disk (while running in single user mode), and then booting from that partition. Using the "b" partition allows you to boot without overwriting any useful parts of the disk, you can also use another partition, but don't used the "a" or "c" partition without understanding the disklabel issues described below under "incompatible systems". This requires that you be running SunOS, Solaris, OpenBSD or NetBSD which have a compatible view of SunOS disk labels and partitions. Use the dd(1) utility to copy the file to the hard drive. The command would likely be, under SunOS: dd if=floppy30.fs of=/dev/rsd0b bs=36b - or - dd if=miniroot30.fs of=/dev/rsd0b bs=36b and under Solaris: dd if=floppy30.fs of=/dev/c0t0d0s1 bs=36b - or - dd if=miniroot30.fs of=/dev/c0t0d0s1 bs=36b The blocksize is arbitrary as long as it's a multiple of 512-bytes and within the maximum supported by the driver, i.e. bs=126b may not work for all cases. Again, device/partition names may vary, depending on the OS involved. If you are preparing the hard drive on an incompatible system or don't care about the hard disk contents, you can also install the bootable image starting at the beginning of the disk. This lets you prepare a bootable hard-drive even if don't have a working operating system on your machine, but it important to understand that the bootable image installed this way includes a "disk label" which can wipe out any pre-existing disklabels or partitioning for the drive. If you're starting with a virgin disk and trying to do this under SunOS, use format(8) and newfs(8) to set up the partitions and mark the intended partition as an normal partition type. If you're using OpenBSD, perhaps on another architecture, OpenBSD will create a "fictitious label" that will let you access the whole disk. The floppy image is used only for booting, and can be placed in a partition that will be overwritten during the install process, since it actually runs off a ram-disk image in the kernel. In contrast the miniroot is a normal unix root filesystem and you must place in a partition that will not be overwritten until you've completed the installation process. To copy the floppy image to the hard disk, preserving SunOS, Solaris, NetBSD or OpenBSD labels: Under SunOS: dd if=floppy30.fs of=/dev/rsdXc bs=1b skip=1 seek=1 and Solaris: dd if=floppy30.fs of=/dev/rdsk/c0tXd0s2 \ bs=1b skip=1 seek=1 You need to be sure that your version of dd(1) supports the skip and seek operands, otherwise you can try a technique like: dd if=/dev/rsdXc of=/tmp/label bs=1b count=1 dd if=floppy30.fs of=/dev/rsdXc bs=36b dd if=/tmp/label of=/dev/rsdXc bs=1b count=1 In either case, you've created a situation where the disklabel and the filesystem information don't agree about the partition size and geometry, however the results will be usable. Creating a network bootable setup using SunOS or other Un*x-like system: The details of setting up a network bootable environment vary considerably, depending on the network's host. Extract the OpenBSD diskless(8) man page from the man30.tgz distribution set or see the copy on the OpenBSD web page. You will also need to reference the relevant man pages or administrators guide for the host system. Basically, you will need to set up reverse-arp (rarpd) and boot parameter (bootpd) information and make the OpenBSD bootblock, kernel/miniroot partition, and a swap file available as required by the netboot setup. The steps necessary to prepare the distribution sets for installation depend on which method of installation you choose. Some methods require a bit of setup first that is explained below. The installation allows installing OpenBSD directly from FTP mirror sites over the internet, however you must consider the speed and reliability of your internet connection for this option. It may save much time and frustration to use ftp get/reget to transfer the distribution sets to a local server or disk and perform the installation from there, rather than directly from the internet. The variety of options listed may seem confusing, but situations vary widely in terms of what peripherals and what sort of network arrangements a user has, the intent is to provide some way that will be practical. Create an installation tape: While you won't be able to boot OpenBSD from a tape, you can use one to provide the installation sets. To do so, you need to make a tape that contains the distribution set files, each in "tar" format or in "gzipped tar format". First you will need to transfer the distribution sets to your local system, using ftp or by mounting the CD-ROM containing the release. Then you need to make a tape containing the files. If you're making the tape on a UN*X-like system, the easiest way to do so is make a shell script along the following lines, call it "/tmp/maketape". #! /bin/sh TAPE=${TAPE:-/dev/nrst0} mt -f ${TAPE} rewind for file in base etc comp game man misc xbase xfont xserv xshare do dd if=${file}30.tgz of=${TAPE} obs=8k conv=sync done tar cf ${TAPE} bsd mt -f ${TAPE} offline # end of script And then: cd .../3.0/sparc64 sh -x /tmp/maketape If you're using a system other than OpenBSD or SunOS, the tape name and other requirements may change. You can override the default device name (/dev/nrst0) with the TAPE environment variable. For example, under Solaris, you would probably run: TAPE=/dev/rmt/0n sh -x /tmp/maketape Note that, when installing, the tape can be write-protected (i.e. read-only). To install OpenBSD using a remote partition, mounted via NFS, you must do the following: NOTE: This method of installation is recommended only for those already familiar with using BSD network configuration and management commands. If you aren't, this documentation should help, but is not intended to be all-encompassing. Place the OpenBSD distribution sets you wish to install into a directory on an NFS server, and make that directory mountable by the machine on which you are installing or upgrading OpenBSD. This will probably require modifying the /etc/exports file of the NFS server and resetting its mount daemon (mountd). (Both of these actions will probably require superuser privileges on the server.) You need to know the numeric IP address of the NFS server, and, if the server is not on a network directly connected to the machine on which you're installing or upgrading OpenBSD, you need to know the numeric IP address of the router closest to the OpenBSD machine. Finally, you need to know the numeric IP address of the OpenBSD machine itself. Once the NFS server is set up properly and you have the information mentioned above, you can proceed to the next step in the installation or upgrade process. If you're installing OpenBSD from scratch, go to the section on preparing your hard disk, below. If you're upgrading an existing installation, go directly to the section on upgrading. If you are upgrading OpenBSD, you also have the option of installing OpenBSD by putting the new distribution sets somewhere in your existing file system, and using them from there. To do that, do the following: Place the distribution sets you wish to upgrade somewhere in your current file system tree. At a bare minimum, you must upgrade the "base" binary distribution, and so must put the "base30" set somewhere in your file system. It is recommended that you upgrade the other sets, as well. Preparing your System for OpenBSD Installation: ----------------------------------------------- Your OpenBOOT ROM may need some setup. You cannot use the security modes of the OpenBOOT ROM. Make sure that the ROM security modes are disabled: ok setenv security-mode none Please note that while OpenBSD and Solaris have a reasonable degree of compatibility between disk labels and filesystems there are some problems to watch out for during initial installation or when trying to maintain both OpenBSD and Solaris environments on the same system. If the OpenBSD fsck(8) utility is used on a Solaris filesystem, it will set OpenBSD "clean flags" and BSD4.4 summary fields in the superblock. Solaris does *not* like this and you will have to do a "fsck -b 32" under Solaris to access an alternate superblock to repair the filesystem. You should always specify Solaris filesystem with a "pass number" of 0 in their /etc/fstab entry to prevent this, and preferably mount them "RO". If Solaris fsck is used on an OpenBSD filesystem in the default OpenBSD (4.4BSD) format, it will first complain about the superblock and then about missing . and .. entries. Do *not* try to "correct" these problems, as attempting to do so will completely trash the filesystem. You should avoid using soft updates (option softdep in /etc/fstab) on your shared filesystems. Although untested, it is likely that Solaris would be confused by a filesystem with soft update flags enabled. The OpenBSD "Sun Compatible" disklabel have been extended to support 16 partitions, which may be compatible with Solaris, but the Solaris format(1M) utility only sees the first 8 partitions and may "lose" information about the extended partitions. Use Solaris format(1M) only with *extreme* caution on drives that contain OpenBSD partitions. OpenBSD and Sun bootblocks are similar in concept, though implemented differently. The OpenBSD bootblocks are architecture independent and also understand the extended disklabels with 16 partitions. You can use Solaris bootblocks, but remember that OpenBSD bootblocks must be installed with OpenBSD installboot and Solaris bootblocks with Solaris installboot. Most of new Ultras shipped by Sun with a preinstalled Solaris have an initial specific factory setup of the boot ROM, in order to start up Solaris WebStart at the first boot; the boot-device variable is set to disk:f. Make sure you reset the boot device to its default value: ok set-default boot-device will work for most systems. This can be adapted if you've multiple systems installed and know what you're doing. Installing the OpenBSD System: ------------------------------ Installing OpenBSD is a relatively complex process, but if you have this document in hand and are careful to read and remember the information which is presented to you by the install program, it shouldn't be too much trouble. Before you begin, you should know the geometry of your hard disk, i.e. the sector size (note that sector sizes other than 512 bytes are not currently supported), the number of sectors per track, the number of tracks per cylinder (also known as the number of heads), and the number of cylinders on the disk. The OpenBSD kernel will try to discover these parameters on its own, and if it can it will print them at boot time. If possible, you should use the parameters it prints. (You might not be able to because you're sharing your disk with another operating system, or because your disk is old enough that the kernel can't figure out its geometry.) There are several ways to install OpenBSD onto a disk. The easiest way in terms of preliminary setup is to use the OpenBSD installation cdrom, or an installation floppy. If your machine is hooked up in a network and you can find a server to arrange for a diskless setup, which is a convenient way to install on a machine whose disk does not currently hold a usable operating system. This is difficult to get set up correctly the first time, but easy to use afterwards. (see ``Installing using a diskless setup'' below). It is also possible to install OpenBSD "manually" from a running Solaris system, using the system tools, as well as gunzip; see ``Installing from Solaris'' below. Booting from the Installation Media: Prior to attempting an installation, you should make sure that everything of value on the target system has been backed up. While installing OpenBSD does not necessarily wipe out all the partitions on the hard disk, errors during the install process can have unforeseen consequences and you will probably render the system unbootable if you start, but do not complete the installation. Having the installation media for the prior installation, be it a Solaris or OpenBSD CD-ROM or OpenBSD install diskettes is good insurance if you want to be able to "go back" for some reason. After taking care of all that, bring your system down gracefully using the shutdown(8) and/or halt(8) commands. This will get you to the monitor prompt. Booting from Floppy Disk installation media: ok boot floppy bsd This will cause the kernel contained in the floppy to be booted. Booting From CD-ROM installation media: ok boot cdrom If the boot is successful, you will get a loader version message, executable sizes and then the Kernel copyright and device probe messages. Boot failure modes are typically a lot of CD-ROM drive activity, but no messages or complaints about magic numbers, checksums or formats. Booting from disk (miniroot or floppy image): Boot the miniroot by typing the appropriate command at the PROM: ok boot disk:b bsd If you've loaded the miniroot onto some other disk than the default drive 0, modify the boot specifier accordingly, keeping in mind the partition naming a=0, b=1... ok boot disk1:b bsd # example - scsi target 1 or # second ide drive During the boot, the kernel might not be able to determine by itself which device it has been booted from. In this case, it will ask you for the root and swap devices. Answer the device and partition you booted from as the root partition (likely sd0b or wd0b); you might want to rely on the boot messages to find the correct device name (see below). When the kernel asks your for the swap device, just validate the suggested device name; since the installation procedure does not use swap, it doesn't matter. Installing using a diskless setup: First, you must setup a diskless client configuration on a server. If you are using a OpenBSD system as the boot-server, have a look at the diskless(8) manual page for guidelines on how to proceed with this. If the server runs another operating system, you'll have to consult documentation that came with it (on SunOS systems, add_client(8) and the Sun System/Networks administrators guide constitute a good start; on Solaris systems, share(1M) is a good starting point as well). Boot your workstation from the server by entering the appropriate `boot' command at the monitor prompt: ok boot net bsd.rd Installing using the Floppy, CD-ROM, miniroot or netboot procedure: You should now be ready to install OpenBSD. The following is a walk-through of the steps you will take while getting OpenBSD installed on your hard disk. If any question has a default answer, it will be displayed in brackets ("[]") after the question. If you wish to stop the installation, you may hit Control-C at any time, but if you do, you'll have to begin the installation process again from scratch. Using Control-Z to suspend the process may be a better option, or at any prompt enter '!' to get a shell, from which 'exit' will return you back to that prompt (no refresh of the prompt though). Boot your machine from the installation media as described above. It will take a while to load the kernel especially from a floppy or slow network connection, most likely more than a minute. If some action doesn't eventually happen, or the spinning cursor has stopped and nothing further has happened, either your boot media is bad, your diskless setup isn't correct, or you may have a hardware or configuration problem. Once the kernel has loaded, you will be presented with the OpenBSD kernel boot messages. You will want to read them to determine your disk's name and geometry. Its name will be something like "sd0" or "wd0" and the geometry will be printed on a line that begins with its name. As mentioned above, you will need your disk's geometry when creating OpenBSD partitions. You will also need to know the device name to tell the install tools what disk to install on. If you cannot read the messages as they scroll by, do not worry -- you can get at this information later inside the install program. While booting, you will probably see several warnings. You may be warned that the kernel can't figure out what device it booted from. Do not be alarmed, this is completely normal. This warning occurs because while OpenBSD/sparc64 can boot from the floppy drive, the kernel itself lacks a floppy driver. On some machines, you might also get this kind of warning: "No counter-timer -- using %tick at 179MHz as system clock." Unless the frequency displayed does not match your CPU speed, this is nothing to worry about. You will next be asked for your terminal type. If you are installing from a keyboard/monitor console, the default of "sun" if correct. If you are installing from a serial console you should choose the terminal type from amongst those listed. (If your terminal type is xterm, just use vt100). After entering the terminal type you will be asked whether you wish to do an "(I)nstall" or an "(U)pgrade". Enter 'I' for a fresh install or 'U' to upgrade an existing installation. You will be presented with a welcome message and asked if you really want to continue. Assuming you answered yes, the install program will then tell you which disks of that type it can install on, and ask you which it should use. The name of the disk is typically "sd0" for SCSI drives and "wd0" for IDE drives. Reply with the name of your disk. Next you will have to edit or create a disklabel for the disk OpenBSD is being installed on. The installation script will invoke the text editor allowing you to do this. Note that partition 'c' inside this disk label should ALWAYS reflect the entire disk, including any non-OpenBSD portions. The root file system should be in partition 'a', and swap is usually in partition 'b'. It is recommended that you create separate partitions for root and /usr, you may also want to specify /var and /home partitions. The swap partition (usually 'b') should have a type of "swap", all other native OpenBSD partitions should have a type of "4.2BSD". Block and fragment sizes are usually 8192 and 1024 bytes, but can also be 16384 and 2048 bytes. The install program will now label your disk and ask which file systems should be created on which partitions. It will auto- matically select the 'a' partition to be the root file system. Next it will ask for which disk and partition you want a file system created on. This will be the same as the disk name (e.g. "sd0") with the letter identifying the partition (e.g. "d") appended (e.g. "sd0d"). Then it will ask where this partition is to be mounted, e.g. /usr. This process will be repeated until you type "done". At this point you will be asked to confirm that the file system information you have entered is correct, and given an opportunity to change the file system table. Next it will create the new file systems as specified, OVERWRITING ANY EXISTING DATA. This is the point of no return. After all your file systems have been created, the install program will give you an opportunity to configure the network. The network configuration you enter (if any) can then be used to do the install from another system using NFS, HTTP or FTP, and will also be the configuration used by the system after the installation is complete. If you select to configure the network, the install program will ask you for a name of your system and the DNS domain name to use. Note that the host name should be without the domain part, and that the domain name should NOT include the host name part. Next the system will give you a list of network interfaces you can configure. For each network interface you select to configure, it will ask for the IP address to use, the symbolic host name to use, the netmask to use and any media flags to set. It is usually safe to keep the default settings. After all network interfaces have been configured the install pro- gram will ask for a default route and IP address of the primary name server to use. You will also be presented with an opportunity to edit the host table. At this point you will be allowed to edit the file system table that will be used for the remainder of the installation and that will be used by the finished system, following which the new file systems will be mounted to complete the installation. After these preparatory steps have been completed, you will be able to extract the distribution sets onto your system. There are several install methods supported; FTP, HTTP, tape, CD-ROM, NFS or a local disk partition. Note that installation from floppies is not currently supported. To install via FTP: To begin an FTP install you will need the following pieces of information. Don't be daunted by this list; the defaults are sufficient for most people. 1) Proxy server URL if you are using a URL-based ftp proxy (squid, CERN ftp, Apache 1.2 or higher). You need to define a proxy if you are behind a firewall that blocks outgoing ftp (assuming you have a proxy available to use). 2) Do you need to use active mode ftp? By default, ftp will attempt to use passive mode and fall back to an active connection if the server does not support passive mode. You only need to enable this option if you are connecting to a buggy ftp daemon that implements passive ftp incorrectly. Note that you will not be asked about active ftp if you are using a proxy. 3) The IP address (or hostname if you enabled DNS earlier in the install) of an ftp server carrying the OpenBSD 3.0 distribution. If you don't know, just hit return when asked if you want to see a list of such hosts. 4) The ftp directory holding the distribution sets. The default value of pub/OpenBSD/3.0/sparc64 is almost always correct. 5) The login and password for the ftp account. You will only be asked for a password for non-anonymous ftp. For instructions on how to complete the installation via ftp, see the section named "Common URL installations" below. To install via HTTP: To begin an HTTP install you will need the following pieces of information: 1) Proxy server URL if you are using a URL-based http proxy (squid, CERN ftp, Apache 1.2 or higher). You need to define a proxy if you are behind a firewall that blocks outgoing http connections (assuming you have a proxy available to use). 2) The IP address (or hostname if you enabled DNS earlier in the install) of an http server carrying the OpenBSD 3.0 distribution. If you don't know, just hit return when asked if you want to see a list of such hosts. 3) The directory holding the distribution sets. There is no standard location for this; You should use the directory specified along with the server in the list of official http mirror sites that you received in step 3. For instructions on how to complete the installation via http, see the section named "Common URL installations" below. To install from tape: In order to install from tape, the distribution sets to be installed must have been written to tape previously, either in tar format or gzip-compressed tar format. You will also have to identify the tape device where the distribution sets are to be extracted from. This will typically be "nrst0" (no-rewind, raw interface). Next you will have to provide the file number of the set that is to be extracted. Note that the file number starts at 1, which is the first file written to the tape. The install program will not automatically detect whether an image has been compressed, so it will ask for that information before starting the extraction. To install from CD-ROM: When installing from a CD-ROM, you will be asked which device holds the distribution sets. This will typically be "cd0". Next you will be asked which partition on the CD-ROM the distribution is to be loaded from. This is normally partition "a". Next you will have to identify the file system type that has been used to create the distribution on the CD-ROM, this can be either FFS or ISO CD9660. The OpenBSD CD distribution uses the CD9660 format. You will also have to provide the relative path to the directory on the CD which holds the distribution, for the sparc64 this is "3.0/sparc64". For instructions on how to complete the installation from the CD-ROM distribution, see the section named "Common file system installations" below. On some pci-based systems, installing files from CD-ROM yields a lot of ``pciide bogus intr'' warning messages. While annoying, these messages do not prevent the installation from suceeding. To install from a NFS mounted directory: When installing from a NFS-mounted directory, you must have completed network configuration above, and also set up the exported file system on the NFS server in advance. First you must identify the IP address of the NFS server to load the distribution from, and the file system the server expects you to mount. The install program will also ask whether or not TCP should be used for transport (the default is UDP). Note that TCP only works with newer NFS servers. You will also have to provide the relative path to the directory on the file system where the distribution sets are located. Note that this path should not be prefixed with a '/'. For instructions on how to complete the installation from the CD-ROM distribution, see the section named "Common file system installations" below. To install from a local disk partition: When installing from a local disk partition, you will first have to identify which disk holds the distribution sets. This is normally "wdN" or "sdN" where N is a number 0 through 9. Next you will have to identify the partition within that disk that holds the distribution, this is a single letter between 'a' and 'p'. You will also have to identify the type of file system residing in the partition identified. Currently, you can only install from partitions that has been formatted as the Berkeley fast file system (ffs). You will also have to provide the relative path to the directory on the file system where the distribution sets are located. Note that this path should not be prefixed with a '/'. For instructions on how to complete the installation from the a local disk partition, see the next section. Common file system installations: The following instructions are common to installations from local disk partitions, NFS mounted directories and CD-ROMs. A list of available distribution sets will be listed. You may individually select distribution sets to install or enter `all' to install all of the sets (which is what most users will want to do). You may also enter `list' to get a file list or `done' when you are done selecting distribution sets. You may also use wildcards in place of a file name, e.g. `*.tgz' or even `base*|comp*'. It is also possible to enter an arbitrary filename and have it treated as a file set. Once you have selected the file sets you want to install and entered `done' you will be prompted to verify that you really do want to extract file sets. Assuming you acquiesce, the files will begin to extract. If not, you will be given the option of installing sets via one of the other install methods. Common URL installations: Once you have entered the required information, the install program will fetch a file list and present a list of all the distribution sets that were found in the specified directory. (If no valid sets were found, you will be notified and given the option of unpacking any gzipped tar files found or getting a file list if none were found.) At this point you may individually select distribution sets to install or enter `all' to install all of the sets (which is what most users will want to do). You may also enter `list' to get a file list or `done' when you are done selecting distribution sets. You may also use wildcards in place of a file name, e.g. `*.tgz' or even `base*|comp*'. It is also possible to enter an arbitrary filename and have it treated as a file set. Once you have selected the file sets you want to install and entered `done' you will be prompted to verify that you really do want to download and install the files. Assuming you acquiesce, the files will begin to download and unpack. If not, you will be given the option of installing sets via one of the other install methods. When all the selected distribution sets has been extracted, you will be allowed to select which time zone your system will be using, all the device nodes needed by the installed system will be created for you and the file systems will be unmounted. For this to work properly, it is expected that you have installed at least the "base30", "etc30", and "bsd" distribution sets. After completing an installation: Now try a reboot. (If needed, swap your scsi id's first). Initially I'd suggest you "boot sd()bsd -bs", then try multiuser after that. if you boot single-user the OpenBSD incantation to make the root filesystem writable is OpenBSD# mount -u /dev/sd0a / The UltraSPARC OpenFirmware will normally load the kernel from the device and filename as instructed by the ``boot-device'' and ``boot-file'' variables. If the ``boot-file'' variable is empty, the OpenBSD bootloader will look for a kernel named ``bsd'', unless a different filename has been specified in the boot command. To reset this variable to its default, empty, value, type the following: ok set-default boot-file Congratulations, you have successfully installed OpenBSD 3.0. When you reboot into OpenBSD, you should log in as "root" at the login prompt. You should create yourself an account and protect it and the "root" account with good passwords. You should have got a mail from the install program we recommend you to read, it contains answers to basic questions you might have about OpenBSD (like setting up your system, installing packages, getting more information about OpenBSD, sending in your dmesg output and more). This you can do by running mail and then just enter "1" to get the first message. You quit mail by entering "q". Some of the files in the OpenBSD 3.0 distribution might need to be tailored for your site. We recommend you run: man afterboot which will tell you about a bunch of the files needing to be reviewed. If you are unfamiliar with UN*X-like system administration, it's recommended that you buy a book that discusses it. If you will be running your OpenBSD system from a serial console, you may need to edit /etc/ttys and change the terminal type, and getty method from "sun" and "suncons" to "vt100" and "std.9600" or something similar. Also when running from a serial console, you may wish to adjust the eeprom settings for input-device, output-device, screen-#columns, and screen-#rows as appropriate. In order to use 'tip' on OpenBSD/sparc64, you'll need to edit /etc/ttys and add "local" to the end of the tty configuration line, and run 'ttyflags -a' to put your changes into effect. Installing from Solaris: You need a machine running under Solaris to install OpenBSD. You will also need at least the following pieces: - the *.tgz files you want to install (as a minimum, base30.tgz and etc30.tgz) - gunzip (GNU gzip) Solaris binary - a boot block file from a Solaris machine that matches your machine type, for ufs filesystem, such as /usr/platform/`uname -i`/lib/fs/ufs/bootblk - an OpenBSD kernel All these pieces, except the boot block and the GNU utilities are supplied in the OpenBSD/sparc64 distribution. You need to format and partition the disk using Solaris (since OpenBSD/sparc64 uses Sun compatible disk labels.) Give yourself adequate partition sizes. Here is an example layout: solaris# prtvtoc -s /dev/rdsk/c0t1d0s2 * First Sector Last * Partition Tag Flags Sector Count Sector Mount Directory 0 2 00 0 80000 79999 / 1 3 01 80000 256000 335999 2 5 00 0 4165271 4165270 3 7 00 336000 100000 435999 /tmp 4 7 00 436000 100000 535999 /var 5 7 00 536000 400000 935999 /var/tmp 6 4 00 936000 3229271 4165270 /usr Use Solaris to newfs the partitions which will have filesystems on them. (OpenBSD's filesystem format is almost identical to Solaris). solaris# newfs /dev/rdsk/c0t1d0s0 [... lots of output] Repeat for any other partition (in this example, /dev/rdsk/c0t1d0s3, /dev/rdsk/c0t1d0s4, /dev/rdsk/c0t1d0s5 and /dev/rdsk/c0t1d0s6). NOTE: If you are able to, there is a performance benefit from newfs'ing using OpenBSD. If you newfs using the OpenBSD newfs command, be sure to use the -O flag for your / partition, so that newfs will use the 4.3BSD filesystem format, rather than the new 4.4BSD filesystem format. If you forget, you will not be able to boot -- the Solaris boot blocks do not understand the extended 4.4BSD filesystem format. Mount those partitions in a tree formation, under /mnt; ie: solaris# df -k Filesystem kbytes used avail capacity Mounted on [...] /dev/dsk/c0t1d0s0 38427 0 38427 0% /mnt /dev/dsk/c0t1d0s3 48249 0 48249 0% /mnt/tmp /dev/dsk/c0t1d0s4 48249 0 48249 0% /mnt/var /dev/dsk/c0t1d0s5 193536 0 193536 0% /mnt/var/tmp /dev/dsk/c0t1d0s6 1564024 0 1564024 0% /mnt/usr Place the boot block in /mnt (your new root partition), and use the Solaris command "installboot" to make it work. The installboot man page says to do something like this: solaris# cp /usr/platform/`uname -i`/lib/fs/ufs/bootblk /mnt/bootblk solaris# sync; sync solaris# /usr/sbin/installboot /mnt/bootblk /dev/rdsk/c0t1d0s0 You can now extract the provided "*.tgz files onto your disk. solaris# ls -FC base30.tgz etc30.tgz misc30.tgz xserv30.tgz bsd game30.tgz xbase30.tgz xshare30.tgz comp30.tgz man30.tgz xfont30.tgz solaris# gunzip < base30.tgz | (cd /mnt; tar xvpf -) [...] for each set And finally copy the OpenBSD kernel onto your disk. solaris# cp bsd /mnt/bsd The GNU gunzip program is not distributed as part of Solaris, but may be present in your /usr/local/bin. If not, you will need to obtain it from a GNU archive and install before proceeding. After the files have been extracted, setup /mnt/etc/fstab to match your actual disk layout. (Minus the "/mnt" component of each path, of course :-) Now proceed to reboot the machine and the customize your installation. Net Boot or Diskless Setup Information: The set up is similar to the diskless setup, but not identical, because the Sun setup assumes that the bootblocks load a kernel image, which then uses NFS to access the exported root partition, while the OpenBSD bootblocks use internal NFS routines to load the kernel image directly from the exported root partition. Please understand that no one gets this right the first try, since there is a lot of setup and all the host daemons must be running and configured correctly. If you have problems, extract the diskless(8) manpage, find someone who's been through it before and use the host syslog and tcpdump(8) to get visibility of what's happening (or not). Your UltraSPARC expects to be able to download a second stage bootstrap program via TFTP after having acquired its IP address through RevARP when instructed to boot "over the net". It will look for a filename composed of the machine's IP address. For example, a machine which has been assigned IP address 130.115.144.11, will make an TFTP request for `8273900B'. Normally, this file is a symbolic link to an appropriate second-stage boot program, which should be located in a place where the TFTP daemon can find it (remember, many TFTP daemons run in a chroot'ed environment). You can find the boot program in `/usr/mdec/boot' in the OpenBSD/sparc64 distribution. After the boot program has been loaded into memory and given control by the PROM, it starts locating the machine's remote root directory through the BOOTPARAM protocol. First a BOOTPARAM WHOAMI request is broadcast on the local net. The answer to this request (if it comes in) contains the client's name. This name is used in next step, a BOOTPARAM GETFILE request -- sent to the server that responded to the WHOAMI request -- requesting the name and address of the machine that will serve the client's root directory, as well as the path of the client's root on that server. Finally, this information (if it comes in) is used to issue a REMOTE MOUNT request to the client's root filesystem server, asking for an NFS file handle corresponding to the root filesystem. If successful, the boot program starts reading from the remote root filesystem in search of the kernel which is then read into memory. You will want export the miniroot30.fs filesystem to the client. You can dd this filesystem image to some spare partition, mount and export that partition or use tar to copy the contents to a more convenient spot. Alternatively you can build a bootable partition from the distribution sets as follows: Unpack `base30.tgz' and `etc30.tgz' on the server in the root directory for your target machine. If you elect to use a separately NFS-mounted filesystem for `/usr' with your diskless setup, make sure the "./usr" base files in base30.tgz end up in the correct location. One way to do this is to temporarily use a loopback mount on the server, re-routing /usr to your server's exported OpenBSD "/usr" directory. Also put the kernel and the install/upgrade scripts into the root directory. A few configuration files need to be edited: /etc/hosts Add the IP addresses of both server and client. /etc/myname This files contains the client's hostname; use the same name as in /etc/hosts. /etc/fstab Enter the entries for the remotely mounted filesystems. For example: server:/export/root/client / nfs rw 0 0 server:/export/exec/sparc64.OpenBSD /usr nfs rw 0 0 Now you must populate the the `/dev' directory for your client. If you server runs SunOS 4.x, you can simply change your working directory to `/dev' and run the MAKEDEV script: `sh MAKEDEV all'. On Solaris (SunOS 5.x) systems, MAKEDEV can also be used, but there'll be error messages about unknown user and groups. These errors are inconsequential for the purpose of installing OpenBSD. However, you may want to correct them if you plan to the diskless setup regularly. In that case, you may re-run MAKEDEV on your OpenBSD machine once it has booted. Upgrading a previously-installed OpenBSD System: ------------------------------------------------ Since OpenBSD 3.0 is the first release for sparc64 systems, upgrades are not expected. If you have been using an old OpenBSD/sparc64 snapshot, you can follow the following instructions. To upgrade OpenBSD 3.0 from a previous version, start with the general instructions in the section "Installing OpenBSD". Boot from the miniroot, or the installation floppy. When prompted, select the (U)pgrade option rather than the (I)nstall option at the prompt in the install process. The upgrade script will ask you for the existing root partition, and will use the existing filesystems defined in /etc/fstab to install the new system in. It will also use your existing network parameters. From then, the upgrade procedure is very close to the installation procedure described earlier in this document. Note that the upgrade procedure will not let you pick the ``etc30.tgz'' set, so as to preserve your files in `/etc' which you are likely to have customized since a previous installation. However, it is strongly advised that you unpack the etc30.tgz set in a temporary directory and merge changes by hand, since all components of your system may not function correctly until your files in `/etc' are updated. Getting source code for your OpenBSD System: -------------------------------------------- Now that your OpenBSD system is up and running, you probably want to get access to source code so that you can recompile pieces of the system. A few methods are provided. If you have an OpenBSD CD, the source code is provided. Otherwise, you can get the pieces over the Internet using ANONCVS, CTM or FTP. For more information, see http://www.openbsd.org/anoncvs.html http://www.openbsd.org/ctm.html http://www.openbsd.org/ftp.html Using online OpenBSD documentation: ----------------------------------- Documentation is available if you first install the manual distribution set. Traditionally, the UN*X "man pages" (documentation) are denoted by 'name(section)'. Some examples of this are intro(1), man(1), apropos(1), passwd(1), and passwd(5). The section numbers group the topics into several categories, but three are of primary interest: user commands are in section 1, file formats are in section 5, and administrative information is in section 8. The 'man' command is used to view the documentation on a topic, and is started by entering 'man [section] topic'. The brackets [] around the section should not be entered, but rather indicate that the section is optional. If you don't ask for a particular section, the topic with the least-numbered section name will be displayed. For instance, after logging in, enter man passwd to read the documentation for passwd(1). To view the documentation for passwd(5), enter man 5 passwd instead. If you are unsure of what man page you are looking for, enter apropos subject-word where "subject-word" is your topic of interest; a list of possibly related man pages will be displayed. Adding third party software; ``packages'' and ``ports'': ------------------------------------------------------- As complete as your OpenBSD system is, you may want to add any of several excellent third party software applications. There are several ways to do this. You can: 1) Obtain the source code and build the application based upon whatever installation procedures are provided with the application. 2) Use the OpenBSD ``ports'' collection to automatically get any needed source file, apply any required patches, create the application, and install it for you. 3) Use the OpenBSD ``package'' collection to grab a pre-compiled and tested version of the application for your hardware. If you purchased the OpenBSD CD-ROM set you already have several popular ``packages'', and the ``ports'' collection. Instructions for installing applications from the various sources using the different installation methods follow. If emacs is to be installed it should be installed first as it creates the ``info'' directory file that may be modified by other applications. You should also refer to the packages(7) manual page. Installing applications from the CD-ROM package collection: The OpenBSD CD-ROM ships with several applications pre-built for various hardware architectures. The number of applications vary according to available disk space. Check the directory 3.0/packages/sparc64 to see which packages are available for your hardware architecture. That directory will be on the same CD-ROM containing the OS installation files for your architecture. To install one or more of these packages you must: 1) become the superuser (root). 2) mount the appropriate CD-ROM. 3) use the ``pkg_add'' command to install the software. Example (in which we use su(1) to get superuser privileges, thus you have to be in group "wheel", see the manual page for su(1)). $ su Password: # mkdir -p /cdrom # mount /dev/cd0a /cdrom # pkg_add /cdrom/OSREV/packages/MACHINE_ARCH/ # # umount /cdrom Package names are usually the application name and version with .tgz appended, e.g. emacs-20.7.tgz Installing applications from the ftp.openbsd.org package collection: All available packages for your architecture have been placed on ftp.openbsd.org in the directory pub/OpenBSD/3.0/packages/sparc64/ You may want to peruse this to see what packages are available. The packages are also on the OpenBSD FTP mirror sites. See http://www.openbsd.org/ftp.html for a list of current ftp mirror sites. Installation of a package is very easy. 1) become the superuser (root) 2) use the ``pkg_add'' command to install the software ``pkg_add'' is smart enough to know how to download the software from the OpenBSD ftp server. Example: $ su Password: # pkg_add \ ftp://ftp.openbsd.org/pub/OpenBSD/3.0/packages/sparc64/emacs-20.7.tgz Packages available include (at least): 9menu-1.5.tgz 9wm-1.2pre.tgz ADMfzap-0.1.tgz ADMsmb-0.2.tgz Business-CreditCard-0.21.tgz GConf-1.0.1.tgz ImageMagick-5.2.9.tgz ORBit-0.5.8.tgz R-1.2.2.tgz STk-3.1.1.tgz TclXML-1.2.1.tgz Tktable-2.7.tgz Wnn-data-4.2.tgz Wnn-xwnmo-4.2.tgz XPostitPlus-2.3.tgz Xaw3d-1.5.tgz a2ps-4.13b-a4.tgz a2ps-4.13b-letter.tgz aalib-1.2-no_x11.tgz aalib-1.2.tgz abook-0.4.13.tgz abs-0.8.tgz abuse-2.0.tgz ac3dec-0.6.1.tgz adcomplain-3.52.tgz aescrypt-0.7.tgz aewm-1.1.2.tgz afm-1.0.tgz afterstep-1.8.9.tgz aggregate-1.3.tgz agrep-2.04.tgz aide-0.7.tgz amanda-2.4.2.2.tgz amanda-client-2.4.2.2.tgz amaya-5.1-motif.tgz amaya-english-dict-19961207.tgz amaya-french-dict-19961217.tgz amph-0.8.9.tgz an-0.93.tgz analog-5.03.tgz angband-2.9.3-no_x11.tgz angband-2.9.3.tgz angst-0.4b.tgz antiword-0.31.tgz apc-upsd-19991128.tgz apg-1.2.13.tgz arc-5.21e.tgz archie-1.4.1.tgz ari-yahoo-1.7.tgz arirang-1.6beta.tgz arpcatch-19970824.tgz arping-1.01.tgz arpwatch-2.1a11.tgz asapm-2.9.tgz ascd-0.13.2.tgz asclock-2.0.12-classic-english.tgz asfiles-1.0.tgz asmail-0.56.tgz asp2php-0.75.22-no_x11.tgz asp2php-0.75.22.tgz aspell-0.33.7.tgz aspell-danish-0.33.7.tgz aspell-dutch-0.33.7.tgz aspell-french-0.33.7.tgz aspell-swedish-0.33.7.tgz ast-ksh-20010704.0000.tgz astime-2.8.tgz astrolog-5.30.tgz astyle-1.14.1.tgz aterm-0.4.0.tgz atlas-0.4.3.1.tgz aub-2.0.5.tgz august-0.63b.tgz aumix-2.7.tgz autobook-1.2.tgz autoconf-2.13.tgz automake-1.4-p5.tgz axe-6.1.2.tgz axyftp-0.5.1p1.tgz baekmuk-fonts-2.0.tgz balance-2.28.tgz base64-1.0.tgz bash-1.14.7p1-static.tgz bash-1.14.7p1.tgz bash-2.05-static.tgz bash-2.05.tgz bbdate-0.2.1.tgz bbkeys-0.3.6-qt.tgz bbkeys-0.3.6.tgz bbpager-0.3.0.tgz bclock-1.0.tgz beav-1.40.13.tgz bfbtester-2.0.1.tgz bibelot-0.9.4.tgz bibview-2.2.tgz bind-9.1.3.tgz bing-1.0.4.tgz bison-1.28.tgz bitchx-1.0c17p1.tgz bk2site-1.1.5.tgz blackbox-0.61.1.tgz bladeenc-0.94.2.tgz blast-1.0.tgz bluefish-0.6.tgz bnc-2.8.4.tgz bnetd-0.4.19.tgz bochs-1.2.1-debug.tgz bochs-1.2.1.tgz boehm-gc-4.12.tgz bonk-0.5.tgz bonnie-1.0.tgz bounix-1.21.tgz bpl+-1.0.tgz bricons-3.0.tgz brs-4.00l1.tgz btoa-5.2.1.tgz bubblemon-1.0.5.tgz bubblemon-dockapp-1.4.tgz buffer-1.17.1.tgz bulk_mailer-1.13.tgz burgerspace-1.5.tgz bvi-1.3.0.tgz bzip-0.21.tgz bzip2-1.0.1.tgz c-client-4.40p1.tgz c2html-0.9.2.tgz calc-2.11.1t3.0.tgz calentool-2.3.tgz cannadict-3.5b2.tgz cannalib-3.5b2p1.tgz cannaserver-3.5b2.tgz catdoc-0.90.3.tgz cbb-0.73.tgz cdparanoia-3.a9.7p2.tgz cdrchive-1.0.1.tgz cdrdao-1.1.5.tgz cdrecord-1.9.tgz centericq-3.35.22.tgz cfs-1.3.3.tgz cgicc-3.1.5.tgz cgichk-3.6.tgz cgiparse-0.9b.tgz cgoban-1.9.11.tgz chrootuid-1.2.tgz cidr-2.3.tgz clisp-2.27.tgz clo++-0.3.0.tgz clog-1.6.tgz cmail-3.1.tgz common-1.0.6.tgz compface-1.0.tgz conserver-5.21.tgz contool-3.3a.tgz control-center-1.4.0.1.tgz cook-2.17.tgz cooledit-3.17.2-python.tgz cooledit-3.17.2.tgz cops-1.04.tgz coq-7.0.tgz corkscrew-2.0.tgz courier-imap-1.3.11-ldap.tgz courier-imap-1.3.11-mysql.tgz courier-imap-1.3.11.tgz courier-pop3-1.3.11-ldap.tgz courier-pop3-1.3.11-mysql.tgz courier-pop3-1.3.11.tgz courtney-1.3.tgz cqcam-0.91.tgz crack-5.0.tgz crank-0.1.4.tgz crawl-0.1b.tgz cscope-15.3.tgz ctm-19960528.tgz ctrace-0.8.tgz ctwm-3.5.2.tgz cucipop-1.31.tgz curl-7.9-kerberos.tgz curl-7.9.tgz cvs2cl-2.30.tgz cvsup-16.1e-no_x11-static.tgz cvsup-16.1e-no_x11.tgz cvsup-16.1e-static.tgz cvsup-16.1e.tgz cvsupd-16.1e-no_x11-static.tgz cvsupd-16.1e-no_x11.tgz cvsupd-16.1e-static.tgz cvsupd-16.1e.tgz cvsweb-1.112.1.82.tgz cyrproxy-1.4.2.tgz cyrus-sasl-1.5.24.tgz d1489-1.4.tgz dante-1.1.10.tgz db-3.1.17.tgz dclock-pl4.tgz ddd-3.2.1.tgz deco-3.8.3.tgz decss-0.0.6.tgz dejagnu-1.3.tgz dejagnu-19990614.tgz dejasearch-1.9.0.tgz delay-1.4.tgz despoof-0.9.tgz dgpsip-1.32.tgz dia-0.88.1.tgz dialog-0.6z.tgz disc-cover-1.2.2.tgz dlint-1.4.0.tgz doc++-3.4.8.tgz doc-2.2.3.tgz docbook-4.1.2.tgz docbook-dsssl-1.72.tgz dopewars-1.4.8.tgz dsniff-2.3.tgz dumpmpeg-0.6.tgz dvipdfm-0.13.2b.tgz dxpc-3.8.0.tgz eboard-0.3.3.tgz ectags-5.0.1.tgz efax-0.9.tgz electricfence-2.0.5.tgz elm-2.4ME+66.tgz elvis-2.1.4-no_x11.tgz elvis-2.1.4.tgz emacs-20.7-no_x11.tgz emacs-20.7.tgz emacs-leim-20.7.tgz emiclock-2.0.2.tgz enjoympeg-0.4.1.tgz enlightenment-0.16.5.tgz enscript-1.6.1.tgz epic4-1.0.1.tgz erlang-47.4.0.tgz es-0.9b1.tgz esound-0.2.22.tgz eterm-0.8.10-kanji.tgz eterm-0.8.10.tgz ethereal-0.8.19-no_x11.tgz ethereal-0.8.19.tgz ettercap-0.6.0.tgz everybuddy-0.2.1beta6.tgz exim-3.33-ldap.tgz exim-3.33-mysql.tgz exim-3.33-no_x11-ldap.tgz exim-3.33-no_x11-mysql-postgresql-ldap.tgz exim-3.33-no_x11-mysql.tgz exim-3.33-no_x11-postgresql.tgz exim-3.33-no_x11.tgz exim-3.33-postgresql.tgz exim-3.33.tgz expat-1.95.1.tgz expect-5.32.1.tgz explorer-0.72.tgz faces-1.6.1.tgz falconseye-1.9.3.tgz fastjar-0.90.tgz fetchmail-5.9.0-kerberos4.tgz fetchmail-5.9.0.tgz fftw-2.1.3.tgz figlet-2.2.tgz fileutils-4.1.tgz findutils-4.1.tgz fire-1.0.tgz firewalk-0.8.tgz flac-1.0.tgz flash-0.4.10.tgz flawfinder-0.15.tgz fleditor-0.4.2.tgz flow-tools-0.55.tgz fltk-1.0.11.tgz flvw-1.0.tgz flwm-1.0.0.tgz fnlib-0.5.tgz fping-1.20.tgz fragrouter-1.6.tgz freebsd_lib-4.0.tgz freeciv-1.12.0-gtk.tgz freeciv-1.12.0.tgz freefonts-0.10.tgz freetds-0.52.tgz freetype-1.3.1.tgz freetype-doc-1.3.1.tgz freeze-2.5.tgz frodo-4.1b.tgz frotz-2.32.tgz fsv-0.9.tgz ftpcopy-0.3.9.tgz fvicons-2.4.2.tgz fvwm2+fvicons-2.4.2-i18n.tgz fvwm2+fvicons-2.4.2.tgz fvwm2-2.4.2-i18n.tgz fvwm2-2.4.2.tgz fvwm95-2.0.43a.tgz gacc-0.7.5.tgz gaim-0.45-esd.tgz gaim-0.45.tgz gcc-3.0.1-c++.tgz gcc-3.0.1-core.tgz gcc-3.0.1-g77.tgz gcc-3.0.1-objc.tgz gcpio-2.4.2.tgz gd-1.8.3-no_x11.tgz gd-1.8.3.tgz gdbm-1.8.0.tgz gdk-pixbuf-0.10.1-gnome.tgz gdk-pixbuf-0.10.1.tgz geg-1.0.2.tgz gemdropx-0.7.tgz gengameng-3.0.tgz gettext-0.10.40.tgz ghostscript-6.51-a4.tgz ghostscript-6.51.tgz ghostscript-7.00-a4.tgz ghostscript-7.00.tgz ghostview-1.5.tgz gif2png-2.4.2.tgz giflib-4.1.0-no_x11.tgz giflib-4.1.0.tgz gifsicle-1.27.tgz giftrans-1.12.tgz gimp-1.2.2.tgz gkrellkam-0.2.3b.tgz gkrellm-1.2.2.tgz gkrellm-reminder-0.3.1.tgz gkrellm-volume-0.8.tgz gkrellmms-0.5.5.tgz gkrellmss-0.2.tgz gkrellstock-0.2.tgz gkrellweather-0.2.7.tgz glade-0.5.11-gnome.tgz glade-0.5.11.tgz gle-3.0.4.tgz glib-1.2.10.tgz glimpse-4.1.tgz glut-3.7.tgz gmake-3.79.1.tgz gmp-3.1.1.tgz gnats-3.113.tgz gnome-applets-1.4.0.1.tgz gnome-core-1.4.0.4.tgz gnome-libs-1.2.13.tgz gnome-users-guide-1.2.tgz gnome-vfs-1.0.1.tgz gnomeicu-0.96.1.tgz gnuchess-4.0.80.tgz gnugo-3.0.0.tgz gnuls-4.1.tgz gnushogi-1.2.3.tgz gnut-0.4.27.tgz gofer-2.30a.tgz gogo-2.26a.tgz gone-1.3.2a.tgz gpa-0.4.2.tgz gperf-2.7.2.tgz gpgme-0.2.2.tgz gphoto-0.4.3.tgz gq-0.4.0.tgz gqmpeg-0.9.0.tgz gqview-0.8.2.tgz grace-5.1.4.tgz gracula-3.0.tgz graphviz-1.7.6.tgz grepmail-4.51.tgz grip-2.95p1.tgz grpn-1.1.1.tgz gsl-0.6.tgz gsm-1.0.10.tgz gtar-1.13.23-static.tgz gtar-1.13.23.tgz gtk+-1.2.10p1.tgz gtk-engines-0.12.tgz gtk-gnutella-0.12.tgz gtkballs-1.04.tgz gtkglarea-1.2.2.tgz gtkmm-1.2.1.tgz gtkpool-0.3.4.tgz gtksee-0.5.0.tgz gtop-1.0.13.tgz gtypist-2.3.2.tgz guavac-1.2.tgz guile-1.4.tgz guilib-1.1.0.tgz gv-3.5.8.tgz ha-0.999b.tgz hackdata-3.3.1.tgz hanterm-fonts-3.1.tgz hanterm-xf-p19.tgz help2man-1.24.tgz heroes-0.12-sdl.tgz hevea-1.05.tgz hexcalc-19951219.tgz hexedit-1.2.1.tgz hlfl-0.52.tgz hnb-1.8.1.tgz hoc-1.1.tgz hping-2.0b54.tgz html2wml-0.4.6.tgz htmldoc-1.8.11.tgz http_load-20010405.tgz http_ping-20010709.tgz httptunnel-3.0.5.tgz hydra-1.3.tgz hypermail-2.1.2-gdbm.tgz hypermail-2.1.2.tgz icb-5.0.9p1.tgz icebreaker-1.2.1.tgz icecast-1.3.11.tgz icewm-1.0.7.7.tgz icmpinfo-1.11.tgz icon-compiler-9.4-no_x11.tgz icon-compiler-9.4.tgz icon-interp-9.4-no_x11.tgz icon-interp-9.4.tgz icon-lib-9.4-no_x11.tgz icon-lib-9.4.tgz id-utils-3.2d.tgz id3ed-1.10.2.tgz idiff-1.0.tgz idled-1.16.tgz imap-uw-2001.313.tgz imaputils-uw-20001219.tgz imlib-1.9.8.1.tgz imm-3.5a1.tgz impress-1.1b9.tgz indent-2.2.6.tgz indexpage-1.0.2.tgz ines-1.2.tgz info2html-1.1.tgz iodbc-2.50.3.tgz ion-20010523.tgz iozone-3.56.tgz ipcheck-0.116.tgz iperf-1.1.1.tgz ipfm-0.10.4.tgz iplog-2.2.3.tgz irc-2.10.3p1.tgz ircii-4.4Z.tgz irssi-0.7.98.3.tgz isearch-1.14.tgz ish-1.11.tgz isic-0.05.tgz isilo-2.58.tgz iso12083-1993.tgz iso8879-1986.tgz ispell-3.1.20.tgz ispell-french-3.1.20.tgz ispell-german-3.1.20.tgz ispell-russian-3.1.20.tgz ispell-swedish-3.1.20.tgz isync-0.5.tgz iview-1.4.tgz ja-Wnn-4.2.tgz ja-Wnndict-4.2.tgz ja-fonts-funet-19911117.tgz ja-fonts-gnu-1.2.tgz ja-groff-1.10_0.99.tgz ja-jvim-2.0r-canna.tgz ja-jvim-2.0r-wnn-canna.tgz ja-jvim-2.0r-wnn.tgz ja-jvim-2.0r.tgz ja-kinput2-3.0-canna-wnn.tgz ja-kinput2-3.0-canna.tgz ja-kinput2-3.0-wnn.tgz ja-kterm-6.2.0-xaw3d.tgz ja-kterm-6.2.0.tgz ja-less-3.32p2.48.tgz ja-nkf-1.62.tgz ja-onew-canna-2.2.10.tgz ja-onew-wnn4-2.2.10.tgz ja-onew-wnn4-canna-2.2.10.tgz ja-w3m-0.2.1p3.tgz jadetex-3.11.tgz jakarta-ant-1.3.tgz jakarta-servletapi-3.2.2.tgz jakarta-tomcat-3.2.2.tgz jbigkit-1.2.tgz jday-1.2.tgz jed-0.99.14-no_x11.tgz jed-0.99.14.tgz jesred-1.2.1.tgz jftpgw-0.12.0.tgz jikes-1.14.tgz jlint-2.3.tgz joe-2.8p1.tgz john-1.6-k6.tgz john-1.6.tgz jove-4.16.tgz jpeg-6b.tgz jpilot-0.99p1.tgz jserv-3.2.2.tgz junit-3.7.tgz junkbuster-2.0.2.tgz kaffe-1.0.6.tgz kakasi-2.3.1.tgz kanjips-19900310.tgz kbanner-2.tgz kbiff-3.5.tgz kdbg-1.2.2.tgz kdeartwork-2.2.1.tgz kdebase-2.2.1.tgz kdebase-ns-2.2.1.tgz kdegames-2.2.1.tgz kdegraphics-2.2.1.tgz kdelibs-2.2.1.tgz kdenetwork-2.2.1.tgz kdetoys-2.2.1.tgz kdoc-2.2.1.tgz kermit-7.0.197.tgz klaxon-1.5.tgz klone-2.1a.tgz kmago-1.1.2-wget.tgz kmago-1.1.2.tgz knapster2-0.3.tgz ko-Wnn-4.2.tgz ko-Wnndict-4.2.tgz koffice-1.1.tgz ksmp3play-0.5.1.tgz kstars-0.6.tgz ktail-0.5.1.tgz kuickshow-0.8.1.tgz kxicq2-0.0.6.tgz kxmleditor-0.6.tgz l0phtcrack-2.52.tgz lam-6.5.1.tgz lame-3.89b.tgz larswm-7.0.13.tgz latex2html-97.1.tgz lclint-2.5r.tgz ldistfp-0.1.4.tgz leafnode-1.9.19.tgz lesstif-0.92.6.tgz lftp-2.4.4.tgz lgeneral-0.5.0.tgz lgrind-3.64.tgz lha-1.14f.tgz libao-0.8.0.tgz libao-arts-0.8.0.tgz libao-esd-0.8.0.tgz libart-2.3.3.tgz libaudiofile-0.2.2.tgz libavl-1.4.0.tgz libcdaudio-0.99.4.tgz libdnd-1.1.tgz libdockapp-0.4.0.tgz libevent-0.3d.tgz libggi-2.0b3.tgz libghttp-1.0.9.tgz libgii-0.7.tgz libglade-0.16-gnome.tgz libglade-0.16.tgz libgtop-1.0.12-gnome.tgz libgtop-1.0.12.tgz libiconv-1.7.tgz libident-0.22.tgz libmng-1.0.1.tgz libnet-1.0.2a.tgz libnids-1.16.tgz libogg-1.0rc2.tgz libproplist-0.10.1.tgz librep-0.13.4.tgz libretto-config-1.0b5.tgz libsigc++-1.0.3.tgz libslang-1.4.4.tgz libst-1.2.tgz libtool-1.3.5p3.tgz libusb-0.1.3b.tgz libuta-0.3.40.tgz libutf8-0.7.3.tgz libvorbis-1.0rc2.tgz libwmf-0.2.0.tgz libworkman-1.4.tgz libxml-2.4.5.tgz libxml1-1.8.15.tgz libxslt-1.0.4.tgz licq-0.61.tgz lincity-1.11.tgz lincvs-0.2.3.tgz links-0.96.tgz linleech-2.2.1.tgz linuxdoc-1.1.tgz lmbench-1.1.tgz logsurfer-1.5a.tgz lopster-0.9.8.tgz lrzsz-0.12.20.tgz lsof-4.57B.tgz lua-4.0.tgz lupe-0.08.tgz lxnb-0.4.tgz lzo-1.07.tgz lzop-1.00.tgz m4-1.4.tgz mad-0.13.0b.tgz magicpoint-1.08a.tgz mailcrypt-3.5.6-emacs-gnupg.tgz maildrop-1.3.4.tgz mailman-2.0.6-postfix.tgz mailman-2.0.6.tgz malsync-2.0.6.tgz mastergear-1.4.tgz mawk-1.3.3.tgz mcsim-4.2.0.tgz mergemaster-1.25.tgz metamail-2.7.tgz mgdiff-1.0.tgz mhash-0.8.9.tgz mhonarc-2.4.9.tgz mico-2.3.5.tgz micq-0.4.7.tgz mindterm-1.9.9.tgz minicom-1.83.1.tgz mirror-2.9.tgz mixer.app-1.7.0.tgz mixmaster-2.0.4b45.tgz mm-1.1.3.tgz mmv-1.01b.tgz mod_auth_radius-1.5.2.tgz mod_gzip-1.3.19.1a.tgz mod_perl-1.26.tgz moon-buggy-0.5.1.tgz moria-5.5.2.tgz mosfet-liquid-0.5.1.tgz most-4.9.0.tgz mouseclock-1.0.tgz movemail-1.0.tgz mp3cddb-0.1.tgz mp3encode-1.10.tgz mp3info-0.2.16.tgz mpack-1.5.tgz mpage-2.5-a4.tgz mpage-2.5-legal.tgz mpage-2.5-us_letter.tgz mpeg_lib-1.3.1.tgz mpeg_play-2.4.tgz mpegaudio-3.9.tgz mpg123-0.59r-esd.tgz mpg123-0.59r.tgz mpg321-0.2.0.tgz mplex-1.1.tgz mrtd-2.2.2a.tgz mrtg-2.9.12a.tgz mshell-1.0.tgz mtools-3.9.8.20010819.tgz mtr-0.42.tgz mutt-1.2.5i-imap-pop.tgz mutt-1.2.5i.tgz mutt-1.3.21i-imap-pop.tgz mutt-1.3.21i.tgz mxconns-3.1.4.tgz mysql++-1.7.9.tgz mysql++-docs-1.7.9.tgz mysql-client-3.23.42.tgz mysql-server-3.23.42-max.tgz mysql-server-3.23.42.tgz mysql-tests-3.23.42.tgz mysql2pgsql-20010320.tgz mysqlgui-1.7.5.tgz nam-1.0a8.tgz nano-1.0.5-slang.tgz nano-1.0.5.tgz nap-1.4.6.tgz nasm-0.98.tgz nbaudit-1.0.tgz nbtscan-1.0.2.tgz ncftp-3.0.3.tgz ndiff-0.04.tgz nedit-5.1.1.tgz nemesis-1.32.tgz nessus-1.0.7a-no_x11-experimental.tgz netatalk-990130.tgz netcdf-3.5b3.tgz nethack-3.3.1-no_x11.tgz nethack-3.3.1-qt.tgz nethack-3.3.1.tgz netpbm-9.19.tgz netperf-2.2alpha.tgz netpipe-2.4.tgz netpipes-4.2-export.tgz netris-0.5.tgz newsfetch-1.21.tgz newvox-1.0.tgz nfsshell-1.0.tgz ngrep-1.40.tgz nmap-2.54b25-no_x11.tgz nmap-2.54b25.tgz nmh-1.0.4.tgz ns-2.1b6.tgz nscache-0.6.tgz nslint-2.0.2a2-static.tgz nslint-2.0.2a2.tgz nsping-0.8.tgz nspmod-0.1.tgz nte-1.7.0.tgz ntl-5.1a.tgz ntop-1.1.tgz ntp-4.1.71.tgz ntp-doc-4.1.71.tgz nulib-3.25.tgz nut-0.44.2-cgi.tgz nut-0.44.2.tgz nvi-m17n-1.79.19991117-canna.tgz nvi-m17n-1.79.19991117.tgz oaf-0.6.5.tgz ocaml-3.02.tgz octave-2.0.16.tgz olvwm-4.2.tgz omega-0.90.4.tgz openjade-1.3.tgz openldap-client-2.0.15.tgz openldap-server-2.0.15.tgz openmotif-2.1.30.5.tgz openmotif-debuglibs-2.1.30.5.tgz openmotif-demos-2.1.30.5.tgz opennap-0.42.tgz oproute-0.7.tgz otcl-1.0a5.tgz outguess-0.2.tgz p5-AI-NeuralNet-BackProp-0.89.tgz p5-AI-NeuralNet-Mesh-0.44.tgz p5-AI-Perceptron-0.01.tgz p5-Algorithm-Diff-1.11a.tgz p5-Algorithm-MDiff-0.94.tgz p5-Algorithm-MarkovChain-0.03.tgz p5-Algorithm-Permute-0.03.tgz p5-Apache-MP3-2.19.tgz p5-ApacheDBI-0.88.tgz p5-AsciiDB-TagFile-1.05.tgz p5-Attribute-Handlers-0.75.tgz p5-Audio-CD-0.04.tgz p5-Authen-Radius-0.05.tgz p5-B-Graph-0.51.tgz p5-BSD-Resource-1.10.tgz p5-Blatte-0.9.4.tgz p5-Blatte-HTML-0.9.tgz p5-C-Scan-0.74.tgz p5-CDDB-1.03.tgz p5-CDDB_get-1.66.tgz p5-CGI-2.76.tgz p5-CGI-XMLApplication-0.9.3.tgz p5-Chatbot-Eliza-0.97.tgz p5-Class-Date-1.0.5.tgz p5-Class-Loader-2.02.tgz p5-Class-MethodMaker-1.02.tgz p5-Compress-LZO-1.00.tgz p5-Compress-Zlib-1.14.tgz p5-Convert-ASN1-0.13.tgz p5-Convert-BER-1.31.tgz p5-Crypt-Blowfish-2.06.tgz p5-Crypt-CBC-1.25.tgz p5-Crypt-DES-2.03.tgz p5-Crypt-SSLeay-0.27.tgz p5-Crypt-Twofish-1.0.tgz p5-Curses-1.06.tgz p5-Curses-Widgets-1.2.tgz p5-DBD-Msql-Mysql-1.22.16-dbimon.tgz p5-DBD-Msql-Mysql-1.22.16.tgz p5-DBD-Pg-1.01.tgz p5-DBI-1.20.tgz p5-DBIx-XHTML_Table-0.95.tgz p5-Data-Flow-0.05.tgz p5-Data-ShowTable-3.3.tgz p5-Date-Calc-4.3.tgz p5-Date-Handler-0.10.tgz p5-DateManip-5.40.tgz p5-Devel-SmallProf-0.9.tgz p5-Digest-MD5-2.12.tgz p5-File-Tail-0.98.tgz p5-Finance-Quote-1.05.tgz p5-Font-TTF-0.26.tgz p5-FreezeThaw-0.41.tgz p5-GD-1.33-no_x11.tgz p5-GD-1.33.tgz p5-GD-Graph-1.33.tgz p5-GD-Graph3d-0.55.tgz p5-GD-TextUtil-0.80.tgz p5-GPG-0.06.tgz p5-Gateway-0.42.tgz p5-GnuPG-0.09.tgz p5-GnuPG-Interface-0.31.tgz p5-Graphics-ColorNames-0.30.tgz p5-Gtk-0.7008-gtkglarea.tgz p5-Gtk-0.7008.tgz p5-HTML-Base-0.6.tgz p5-HTML-CGIChecker-0.90.tgz p5-HTML-Embperl-1.3.3.tgz p5-HTML-FromText-1.005.tgz p5-HTML-Mason-1.03.tgz p5-HTML-Parser-3.25.tgz p5-HTML-Stream-1.49.tgz p5-HTML-Table-1.09.tgz p5-HTML-TableExtract-1.06.tgz p5-HTML-Tagset-3.03.tgz p5-HTML-Tree-3.11.tgz p5-HTTP-GHTTP-1.06.tgz p5-I18N-Charset-1.12.tgz p5-I18N-LangTags-0.26.tgz p5-IO-String-1.01.tgz p5-IO-stringy-2.108.tgz p5-Image-Info-1.08.tgz p5-Image-Size-2.93.tgz p5-Imager-0.38.tgz p5-Locale-Codes-1.06.tgz p5-Locale-PGetText-0.16.tgz p5-MD5-1.7.tgz p5-MIME-Base64-2.12.tgz p5-MIME-tools-5.411.tgz p5-MLDBM-2.00.tgz p5-MP3-ID3v1Tag-1.11.tgz p5-MP3-Info-0.91.tgz p5-Mail-Alias-1.12.tgz p5-Mail-Box-1.112.tgz p5-Mail-IMAPClient-2.1.3.tgz p5-Mail-POP3Client-2.7.tgz p5-Mail-Tools-1.15.tgz p5-Math-GMP-1.06.tgz p5-Net-DNS-0.12.tgz p5-Net-Daemon-0.35.tgz p5-Net-IPv4Addr-0.10.tgz p5-Net-IRC-0.70.tgz p5-Net-ParseWhois-0.62.tgz p5-Net-Pcap-0.04.tgz p5-Net-Ping-External-0.06.tgz p5-Net-RawIP-0.09d.tgz p5-Net-SSLeay-1.09.tgz p5-Net-Server-0.77.tgz p5-Net-Traceroute-1.05.tgz p5-Net-Whois-1.9.tgz p5-News-Article-1.13.tgz p5-News-Newsrc-1.08.tgz p5-PGP-Sign-0.16-pgp.tgz p5-PGP-Sign-0.16-pgp5.tgz p5-PGP-Sign-0.16.tgz p5-Params-Validate-0.06.tgz p5-Parse-RecDescent-1.80.tgz p5-PlRPC-0.2016.tgz p5-SQL-Statement-0.1020.tgz p5-Set-IntSpan-1.07.tgz p5-Set-Scalar-1.10.tgz p5-Storable-1.0.13.tgz p5-String-Approx-3.17.tgz p5-String-Random-0.198.tgz p5-String-Similarity-0.02.tgz p5-Term-ReadKey-2.14.tgz p5-Term-ReadLine-Gnu-1.10.tgz p5-Test-Simple-0.30.tgz p5-Text-Iconv-1.2.tgz p5-Text-PDF-0.16.tgz p5-Text-Template-1.31.tgz p5-Tie-DBI-0.86.tgz p5-Time-HiRes-1.20.tgz p5-Time-TimeDate-1.10.tgz p5-Tk-800.023.tgz p5-Tk-demo-800.023.tgz p5-URI-1.17.tgz p5-Unicode-Map8-0.10.tgz p5-Unicode-String-2.06.tgz p5-WML-Card-0.02.tgz p5-XML-DOM-1.25.tgz p5-XML-LibXML-1.00.tgz p5-XML-LibXSLT-1.09.tgz p5-XML-Parser-2.30.tgz p5-XML-RSS-0.97.tgz p5-XML-Sablotron-0.65.tgz p5-XML-Simple-1.05.tgz p5-XML-Writer-0.4.tgz p5-XML-XPath-1.08.tgz p5-XML-XSLT-0.32.tgz p5-libnet-1.0703.tgz p5-libwww-5.53.tgz p5-sdf-2.001.tgz p5-sybperl-2.13.tgz palm-bookmarks-0.2.tgz palmpower-1.0.2.tgz par-1.52.tgz paragui-0.7.2.tgz pcapmerge-1.0.tgz pccts-1.33r29.tgz pchar-1.4.tgz pcre-3.4.tgz pdflib-4.0.1.tgz pdmenu-1.2.65.tgz pdnsd-1.1.6.tgz perltidy-20010328.tgz pgp-2.6.3.tgz pgp-5.0i.tgz pgpdump-0.11.tgz php3-3.0.18-gd.tgz php3-3.0.18-imap-gd-mysql.tgz php3-3.0.18-imap-gd-postgresql.tgz php3-3.0.18-imap-mysql.tgz php3-3.0.18-imap-postgresql.tgz php3-3.0.18-imap.tgz php3-3.0.18-mysql.tgz php3-3.0.18-postgresql.tgz php3-3.0.18.tgz php4-4.0.6p1-gd-pdflib.tgz php4-4.0.6p1-gd.tgz php4-4.0.6p1-gettext.tgz php4-4.0.6p1-imap-ldap-mysql.tgz php4-4.0.6p1-imap-ldap-no_x11-mysql.tgz php4-4.0.6p1-imap-ldap-no_x11-postgresql.tgz php4-4.0.6p1-imap-ldap-postgresql.tgz php4-4.0.6p1-imap-mysql.tgz php4-4.0.6p1-imap-no_x11-mysql.tgz php4-4.0.6p1-imap-no_x11-postgresql.tgz php4-4.0.6p1-imap-postgresql.tgz php4-4.0.6p1-imap.tgz php4-4.0.6p1-ldap.tgz php4-4.0.6p1-mysql.tgz php4-4.0.6p1-no_x11.tgz php4-4.0.6p1-postgresql.tgz php4-4.0.6p1-snmp.tgz php4-4.0.6p1.tgz php4-pear-4.0.6p1.tgz pi-address-0.4.0.tgz pico-4.1.tgz piewm-1.03.tgz pilot-link-0.9.3.tgz pilrc-2.8p5-no_x11.tgz pilrc-2.8p5.tgz pine+pico-4.40p1.tgz pine-4.40p1.tgz plan-1.6.1.tgz plor-0.3.2.tgz pm3-1.1.15.tgz png-1.0.12.tgz pngcrush-1.5.6.tgz pop3gwd-1.2.tgz popclient-3.0b6.tgz poppy-3.1.tgz popt-1.5.1.tgz portscanner-1.0.tgz portsentry-1.0.tgz postfix-20010228.pl05-ldap.tgz postfix-20010228.pl05-mysql.tgz postfix-20010228.pl05-pcre.tgz postfix-20010228.pl05.tgz postfix-snapshot-20011008.tgz postgresql-7.1.3-odbc.tgz postgresql-7.1.3-tcl-odbc.tgz postgresql-7.1.3-tcl.tgz postgresql-7.1.3.tgz postgresql-clients-7.1.3-odbc.tgz postgresql-clients-7.1.3-tcl-odbc.tgz postgresql-clients-7.1.3-tcl.tgz postgresql-clients-7.1.3.tgz postgresql-docs-7.1.3.tgz povray-3.1g-no_x11.tgz povray-3.1g.tgz ppgen-1.0.tgz ppmtoTbmp-1.1.tgz pptp-1.0.2.tgz prc-tools-0.5.0.tgz prepop-0.1b7.tgz procmail-3.21.tgz proxy-suite-1.7.tgz pspell-0.12.2.tgz pstree-2.16.tgz psutils-1.17-a4.tgz pth-1.4.0p1.tgz pwm-1.0.tgz py-Chart-1.10.tgz py-Checker-0.8.4.tgz py-Gtk-1.4.1-gnome.tgz py-Gtk-1.4.1.tgz py-Imaging-1.1.2.tgz py-gnupg-0.3.0.tgz py-libpcap-0.2.tgz py-mxDateTime-2.0.2.tgz py-mysql-0.9.1c1.tgz py-psycopg-0.99.6-zope.tgz py-psycopg-0.99.6.tgz py-sslwrapper-0.5.tgz py-unit-1.4.1-no_x11.tgz py-unit-1.4.1.tgz py-xml-0.6.6.tgz python-1.5.2-threads.tgz python-1.5.2-tk-threads.tgz python-1.5.2-tk.tgz python-1.5.2.tgz python-2.1.1-threads.tgz python-2.1.1-tk-threads.tgz python-2.1.1-tk.tgz python-2.1.1.tgz python-tools-1.5.2.tgz python-tools-2.1.1.tgz qcad-1.4.7.tgz qhacc-0.6.1a.tgz qiv-1.7.tgz qlwm-1.7.tgz qt-designer-2.3.1.tgz qt2-3.1.tgz qt2-examples-3.1.tgz qt2-html-3.1.tgz quake-20000101-ggi.tgz quake-20000101-sdl.tgz quake-20000101.tgz quakeworld-server-20000101.tgz queso-980922.tgz quirc-0.9.82.tgz qvwm-1.1.8-esound-imlib.tgz qvwm-1.1.8-esound.tgz qvwm-1.1.8-imlib.tgz qvwm-1.1.8.tgz r5rs-19980421.tgz radiusd-cistron-1.6.4.tgz radiusd-lucent-2.1p1.tgz radiusniff-0.2.tgz radiusreport-0.3b6.tgz rain-1.2.8.tgz rat-3.0.33.tgz rats-1.1.tgz rc-1.6-editline.tgz rc-1.6-readline.tgz rc-1.6.tgz rclock-2.7.6.tgz rdesktop-1.0.0.p19.7.4.tgz rdp-1.0.tgz recode-3.6.tgz redhat_base-6.2p2.tgz redhat_motif-2.1.30.tgz relate-2.0.tgz remind-3.0.22.tgz rep-gtk-0.15.tgz rio500-0.7.tgz rman-3.0.9.tgz root-tail-0.0.10.tgz roxirc-1.72.tgz rplay-3.3.2.tgz rpm-3.0.6p1.tgz rpm2cpio-1.1.tgz rrdtool-1.0.33-tcl.tgz rrdtool-1.0.33.tgz rsync-2.4.6.tgz rsynth-2.0.tgz rtty-3.2.tgz ruby-1.6.2.tgz rxp-1.2.3.tgz rxvt-2.7.6p1.tgz s10sh-0.2.0.tgz sablotron-0.65.tgz safecat-1.8.tgz sam-4.3.19980506.tgz samba-2.2.1a.tgz sash-3.4.tgz sattrack-3.1.6.tgz sawfish-0.36.tgz sc-6.21.tgz scanlogd-2.2.tgz scanssh-1.55.tgz scm-5d3-no_x11.tgz scm-5d3.tgz screen-3.9.10.tgz scrollkeeper-0.2.tgz scsh-0.5.3.tgz sdd-1.31.tgz sdl-1.2.2-esd.tgz sdl-1.2.2-sun.tgz sdl-image-1.2.0.tgz sdl-mixer-1.2.0.tgz sdl-net-1.2.2.tgz sdl-ttf-2.0.3.tgz sdlmm-0.1.8.tgz sdlroids-1.3.4.tgz sdlzombies-1.0.0.tgz sdr-2.7e.tgz sentinel-0.8.tgz setquota-0.1.tgz seyon-2.14b.tgz sgmlformat-1.7.tgz sh-utils-2.0.tgz sharity-light-1.2.tgz sharutils-4.2.1.tgz shash-0.2.4-static.tgz shash-0.2.4.tgz shorten-3.3.tgz shtool-1.5.4.tgz simh-2.3d.tgz sing-1.1.tgz siphon-0.666.tgz sirc-2.211.tgz skill-4.0.tgz slash-3.2.2-e8-no_x11.tgz slash-3.2.2-e8.tgz slash-em-3.3.1.6e4f5-no_x11.tgz slash-em-3.3.1.6e4f5.tgz slib-2c9.tgz sliderule-1.0.tgz slirp-1.0c.tgz slrn-0.9.7.2p2.tgz slurpie-2.0b.tgz smbsniff-0.0.1b.tgz smpeg-0.4.4.tgz smtpclient-1.0.0.tgz smurflog-2.1.tgz snes9x-1.37c.tgz sniffit-0.3.7b.tgz snort-1.8.1.tgz socket-1.1.tgz solid-pop3d-0.15.tgz solid-pop3d-0.15p1-apop.tgz source-highlight-1.1.tgz sox-12.17.tgz sp-1.2.1.tgz speak_freely-7.1.tgz speyes-1.2.0.tgz spice-3f5.tgz spider-1.1.tgz spiff-1.0.tgz spim-6.3.tgz splitvt-1.6.3.tgz sqsh-1.7.tgz squeak-3.0.pre2.tgz squid-2.3.tgz ssldump-0.9b1p1.tgz star-1.3-static.tgz star-1.3.tgz starlanes-1.2.2.tgz stat-1.3.tgz stel-19960505.tgz strobe-1.06.tgz stunnel-3.20.tgz surfraw-1.0.3.tgz swatch-3.0.1.tgz swig-1.3.6.tgz swig-examples-1.3.6.tgz swisswatch-0.06.tgz sylpheed-0.6.2.tgz synaesthesia-2.1-esd.tgz t1lib-1.2.tgz tacacs+-4.0.4a.tgz tcl-8.0.5.tgz tcl-8.3.3.tgz tclcl-1.0b9.tgz tcpblast-1.0.tgz tcpflow-0.12.tgz tcplist-2.2.tgz tcpreplay-1.0.1.tgz tcpshow-1.74.tgz tcpstat-1.4.tgz tcptraceroute-1.2.tgz tcs-19950325.tgz tcsh-6.10.00-static.tgz tcsh-6.10.00.tgz teTeX_base-1.0.7.tgz teTeX_texmf-1.0.2.tgz ted-2.10.tgz teknap-1.3g.tgz tempest-1.0.4.tgz tempwatch-1.0.tgz texi2html-1.64.tgz textutils-2.0.tgz tgif-4.1.40.tgz thcrut-0.1.tgz thttpd-2.21b.tgz tidy-4aug00.tgz tiff-3.5.5.tgz tiff2png-0.81.tgz tightvnc-1.2.0-viewer.tgz tightvnc-1.2.0.tgz tin-1.4.5-nntp_only.tgz tin-1.4.5.tgz tintin-1.5.6.tgz tinyfugue-4.0s1.tgz tk-8.0.5.tgz tk-8.3.3.tgz tkcron-2.12.tgz tkcvs-6.0.tgz tkinfo-2.5.tgz tkirc2.46.tgz tkman-2.1.tgz tkrat-2.0.3.tgz tnef-1.0.1.tgz tosha-0.6.tgz totd-1.2.tgz tracker-5.3.tgz trafd-3.0.1.tgz trafshow-3.1.tgz trans-1.20.tgz transfig-3.2.3d.tgz trn-4.0.76.tgz ttcp-1.12.tgz ttmkfdir-0.0.tgz ttyrec-1.0.2.tgz tvtwm-pl11.tgz ubh-2.1.tgz ucd-snmp-4.2.1.tgz ucspi-unix-0.34.tgz udptunnel-1.1.tgz uemacs-4.0.tgz unace-1.2b.tgz unarj-2.43.tgz unclutter-8.tgz unicon-10.0beta.tgz unzip-5.42.tgz urlview-0.9.tgz usbutil-0.4.tgz uucp-1.06.2.tgz varconf-0.5.0.tgz vat-4.0b2.tgz vgb-2.1.tgz vic-2.8ucl4.tgz vid-1.0.1.tgz viewfax-2.3.tgz vim-6.0.11-gtk.tgz vim-6.0.11-no_x11.tgz viz-1.1.1.tgz vnc-3.3.3r2.tgz vnc-viewer-3.3.3r2.tgz vorbis-tools-1.0rc2.tgz vrfy-99.05.22.tgz vtun-2.4.tgz w3m-0.2.1.0.19p1-m17n.tgz w3m-0.2.1p3.tgz w3mir-1.0.10.tgz w9wm-0.4.1.tgz waveplay-20001210.tgz wbd-1.0ucl4.tgz wdiff-0.5.tgz wdsetup-0.6b.tgz webalizer-2.01.06.tgz weblint-1.020.tgz wget-1.7.tgz whisker-1.4.tgz whowatch-1.4.tgz wide-dhcp-1.4.0.3.tgz wily-0.13.41.tgz windowmaker-0.65.1-i18n.tgz windowmaker-0.65.1.tgz windowmaker-extra-0.1.tgz wine-990225.tgz wmapm-3.1.tgz wmbiff-0.2p.tgz wmbutton-0.4.tgz wmcalc-0.3.tgz wmcalclock-1.25.tgz wmcube-0.98.tgz wmcube-gdk-0.98p1.tgz wmdate-0.7.tgz wmfishtime-1.23.tgz wmglobe-1.3.tgz wmgrabimage-0.72.tgz wmicons-1.0.tgz wminfo-1.51.tgz wmitime-0.3.tgz wmmail-0.64.tgz wmmand-1.0.tgz wmmenu-0.5-gdk_pixbuf.tgz wmmenu-0.5.tgz wmminichess-0.8.tgz wmmixer-1.0b1.tgz wmmon-1.0b2.tgz wmmoonclock-1.27.tgz wmmp3-0.12.tgz wmnet-1.06.tgz wmnetscapekiller-0.3.tgz wmphoto-0.3a.tgz wmpinboard-1.0.tgz wmpop3-0.5.6a.tgz wmspaceweather-1.04.tgz wmsun-1.03.tgz wmtheme-1.2.9.tgz wmthemeinstall-0.62.tgz wmtictactoe-1.1.1.tgz wmtime-1.0b2.tgz wmtimebomb-0.2.0.tgz wmtimer-2.2.tgz wmtune-1.1c-aztech.tgz wmtune-1.1c-radiotrack.tgz wmtune-1.1c-zoltrix.tgz wmtz-0.7.tgz wmwave-0.4.tgz wmweather-1.31.tgz wmx-6.tgz workman-1.3a.tgz wsoundprefs-1.1.1.tgz wsoundserver-0.4.0-esd.tgz wsoundserver-0.4.0.tgz wterm-6.2.6.tgz wv-0.6.5.tgz wwwcount-2.5.tgz wwwoffle-2.5e.tgz x2vnc-1.2.tgz x2x-1.27.tgz x48-0.4.0.tgz xanim-2.80.1.tgz xantfarm-1.16.tgz xarchie-2.0.10.tgz xasteroids-5.0.tgz xbatt-1.2.1.tgz xbattle-5.4.1.tgz xbill-2.0.tgz xbl-1.0j.tgz xblast-2.6b.tgz xbmbrowser-5.1.tgz xboard-4.2.3.tgz xboing-2.4.tgz xbreaky-0.0.4.tgz xcb-2.3i.tgz xcd-1.6.tgz xcdplayer-2.2.tgz xcept-2.1.2.tgz xchat-1.8.4-no_ssl.tgz xchat-1.8.4.tgz xco-1.3.tgz xcoloredit-1.2.tgz xcolors-1.3.tgz xcopilot-0.6.6.tgz xcubes-5.5.2.tgz xcyrillic-2.0.tgz xd-8087.tgz xdaliclock-2.18.tgz xdelta-1.1.1.tgz xdino-5.5.2.tgz xdmchoose-1.1.2.tgz xdtm-2.5.8.tgz xdu-3.0.tgz xearth-1.1.tgz xemacs-21.1.14-mule.tgz xemacs-21.1.14.tgz xemacs-sumo-21.20010204-mule.tgz xemacs-sumo-21.20010204.tgz xengine-1.0.1.tgz xephem-3.2.3.tgz xerces-1.4.3.tgz xevil-1.5.tgz xfce-3.6.3.tgz xfed-1.0.tgz xfedor-5.0.1.tgz xfig-3.2.3d.tgz xfm-1.4.3.tgz xfmail-1.4.6.tgz xforms-0.88.tgz xfstt-1.1.tgz xgas-1.0.tgz xglobe-0.5p2-no_map.tgz xglobe-0.5p2.tgz xgolgo-1.0.tgz xgrab-2.41.tgz xhippo-3.2.tgz xinvaders-2.0.tgz xjewel-1.6.tgz xjig-2.4.tgz xkeycaps-2.46.tgz xkobo-1.11-harder.tgz xkobo-1.11.tgz xlbiff-3.0.tgz xless-1.7.tgz xlhtml-0.2.9.8.tgz xlife-5.3.tgz xloadimage-4.1.9.tgz xlogout-1.1.tgz xmahjongg-3.5.tgz xmame+xmess-0.37b13.2-x11.tgz xmame-0.37b13.2-x11.tgz xmascot-2.6a.tgz xmbdfed-4.4.tgz xmcd-2.6p1.tgz xmedcon-0.5.2.tgz xmess-0.37b13.2-x11.tgz xmhtml-1.1.7.tgz xmine-1.0.3.tgz xminehunter-0.4.tgz xminesweep-3.0.tgz xmix-2.1.tgz xmj-1.0.tgz xml2rfc-1.8-no_x11.tgz xml2rfc-1.8.tgz xmmix-1.2.tgz xmms-1.2.5.tgz xmms-esd-1.2.5.tgz xmms-flac-1.0.tgz xmms-shn-2.2.4.tgz xmms-smpeg-0.3.4.tgz xmms-vorbis-1.2.5.tgz xmold-1.0.tgz xmp-1.1.5.tgz xmris-4.04.tgz xmysql-1.9.tgz xmysqladmin-1.0.tgz xnc-4.4.4.tgz xneko-4.4.tgz xonix-1.4.tgz xosview-1.7.4.tgz xpaint-2.6.1.tgz xpat2-1.04.tgz xpdf-0.92.tgz xphoon-91.9.18.tgz xpilot-4.4.1.tgz xpostit-3.3.1.tgz xprobe-0.0.1p1.tgz xprompt-1.4.tgz xps-3.21.tgz xroach-4.4.tgz xruskb-1.15.0-motif.tgz xruskb-1.15.0.tgz xscavenger-1.4.2.tgz xscrabble-1.0.tgz xscreensaver-3.33-gtk.tgz xskat-3.4.tgz xsnow-1.40.tgz xsol-2.1.1.tgz xsoldier-0.96.tgz xspread-3.1.1c.tgz xtacy-1.14.tgz xtar-1.4.tgz xtattr-1.0.tgz xteddy-2.0.1.tgz xterm-159.tgz xtermset-0.5.1.tgz xtestpicture-1.1.tgz xtimer-0.8089.tgz xtoolwait-1.3.tgz xtraceroute-0.8.14.tgz xuvmstat-20010220.tgz xv-3.10a.tgz xview-clients-3.2.1.tgz xview-config-3.2.1.tgz xview-lib-3.2.1.tgz xwit-3.4.tgz xworld-2.0.tgz xwpe-1.5.22a.tgz xwrits-2.15.tgz xxdiff-1.13.tgz xzoom-0.3.tgz yafc-0.7.3.tgz yorick-1.5.02.tgz ytalk-3.1.1-no_x11.tgz ytalk-3.1.1.tgz ytree-1.73.tgz zangband-2.6.2-no_x11.tgz zangband-2.6.2.tgz zap-1.1.tgz zebra-0.92a-snmp.tgz zebra-0.92a.tgz zh-Wnn-4.2.tgz zh-Wnndict-4.2.tgz zh-bg5ps-1.3.0.tgz zh-c2t-1.0.tgz zh-cless-290.tgz zh-crxvt-2.10.2.tgz zh-fonts-arphicttf-2.11.tgz zh-fonts-kc-1.05.tgz zh-fonts-taipei-1.01.tgz zh-lunar-2.1.tgz zh-ttfm-0.9.3.tgz zh-xcin-2.3.04.tgz zip-2.3.tgz zoo-2.10.1.tgz zope-2.4.1.1.tgz zsh-4.0.2-static.tgz zsh-4.0.2.tgz zsh-zftp-4.0.2.tgz Note: these packages may not exist for all architectures; other packages may be added. Some packages are only available via ftp. Installing applications from the CD-ROM ports collection: The CD-ROM ``ports'' collection is a set of Makefiles, patches, and other files used to control the building and installation of an application from source files. Creating an application from sources can require a lot of disk space, sometimes 50 megabytes or more. The first step is to determine which of your disks has enough room. Once you've made this determination read the file PORTS located on the CD-ROM which contains the ports tree. To build an application you must: 1) become the superuser (root) 2) have network access, or obtain the actual source files by some other means. 3) cd to the ports directory containing the port you wish to build. To build samba, for example, where you'd previously copied the ports files into the /usr/ports directory: cd /usr/ports/net/samba 4) make 5) make install 6) make clean Installing applications from the OpenBSD ports collection: See http://www.openbsd.org/ports.html for current instructions on obtaining and installing OpenBSD ports. You should also refer to the ports(7) manual page. Installing other applications: If an OpenBSD package or port does not exist for an application you're pretty much on your own. The first thing to do is ask ports@openbsd.org if anyone is working on a port -- there may be one in progress. If no luck there you may try the FreeBSD ports or NetBSD package collection. If you are on an i386 based machine it is quite possible that the FreeBSD port, if one exists, will work for you. If you can't find an existing port try to make your own and feed it back to OpenBSD. That's how our ports collection grows. Some details can be found at http://www.openbsd.org/porting.html with more help coming from the mailing list, ports@openbsd.org. Administrivia: -------------- There are various mailing lists available via the mailing list server at . To get help on using the mailing list server, send mail to that address with an empty body, and it will reply with instructions. There are also two OpenBSD Usenet newsgroups, comp.unix.bsd.openbsd.announce for important announcements and comp.unix.bsd.openbsd.misc for general OpenBSD discussion. To report bugs, use the 'sendbug' command shipped with OpenBSD, and fill in as much information about the problem as you can. Good bug reports include lots of details. Additionally, bug reports can be sent by mail to: bugs@OpenBSD.ORG Use of 'sendbug' is encouraged, however, because bugs reported with it are entered into the OpenBSD bugs database, and thus can't slip through the cracks. As a favor, please avoid mailing huge documents or files to the mailing lists. Instead, put the material you would have sent up for FTP somewhere, then mail the appropriate list about it, or, if you'd rather not do that, mail the list saying you'll send the data to those who want it.