FREQUENTLY ASKED QUESTIONS
INDEX
1. I'm still using version 1.0 of MaraDNS
2. How do I try out MaraDNS?
3. What license is MaraDNS released under?
4. How do I report bugs in MaraDNS?
5. Some of the postings to the mailing list do not talk
about MaraDNS!
6. How do I get off the mailing list?
7. How do I set up reverse DNS on MaraDNS?
8. I am on a slow network, and MaraDNS can not process
recursive queries
9. When I try to run MaraDNS, I get a
cryptic error message.
10. After I start MaraDNS, I can not see the process
when I run netstat -na
11. What string library does MaraDNS use?
12. Why does MaraDNS use a multi-threaded model?
13. I feel that XXX feature should be added to MaraDNS
14. I feel that MaraDNS should use another documentation
format
15. Is there any process I need to follow to add a patch
to MaraDNS?
16. Can MaraDNS act as a primary nameserver?
17. Can MaraDNS act as a secondary nameserver?
18. What is the difference between an authoritative and
a recursive DNS server?
19. The getzone client isn't allowing me to add certain
hostnames to my zone
20. Is MaraDNS portable?
21. Can I use MaraDNS in Windows?
22. MaraDNS freezes up after being used for a while
23. What kind of Python integration does MaraDNS have
24. Doesn't "kvar" mean "four" in Esperanto?
25. How scalable is MaraDNS?
26. I am having problems setting
upstream_servers
27. Why doesn't the MaraDNS.org web page validate?
28. How do MX records work?
29. Does MaraDNS have support for SPF?
30. I'm having problems resolving CNAMES I have set up.
31. I have a NS delegation, and MaraDNS is doing
strange things.
32. I am transferring a zone from another
server, but the NS records are these strange "synth-ip" records.
33. Where is the root.hints file?
34. Are there any plans to use autoconf to build
MaraDNS?
35. How do I change the compiler or compile-time flags
with MaraDNS' build process?
36. Will you make a package for the particular Linux
distribution I am using?
37. I am using the native Windows port of MaraDNS,
and some features are not working.
38. MaraDNS isn't starting up
39. You make a lot of releases of MaraDNS; at our
ISP/IT department, updating software is non-trivial.
ANSWERS
1. I'm still using version 1.0 of MaraDNS
MaraDNS 1.0 will continue to be supported until December 21, 2007; this
means that MaraDNS 1.0 bug fixes will
still be applied. After 2007/12/21, MaraDNS 1.0 will no longer be fully
supported; the only updates, at that point, would be bugtraq-worthy critical
security fixes. Not even these security updates will be applied after
December 21, 2010.
People who wish to run MaraDNS 1.0 unsupported after 2010/12/21 need to keep
in mind that MaraDNS 1.0 is not Y2038 compliant, and will have
problems starting in 2036 or so. MaraDNS 1.2, on the other hand, is fully
Y2038 compliant.
There is still a FAQ for version 1.0 of MaraDNS available
here.
Updating from 1.0 to 1.2 requires a minimum number of changes; with most
configurations, MaraDNS 1.2 is fully compatible with MaraDNS 1.0 data
files. Details are in the updating document
in the tutorial.
While csv1 zone files are fully supported in MaraDNS 1.2, there is a Perl
script for updating from CSV1 to CSV2 zone files in the tools/
directory of MaraDNS 1.2.
2. How do I try out MaraDNS?
Read the quick
start guide, which is the file named 0QuickStart in the MaraDNS
distribution.
3. What license is MaraDNS released under?
MaraDNS 1.2 is released with the following two-clause
BSD-type license:
Copyright (c) 2002-2007 Sam Trenholme
TERMS
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
This software is provided 'as is' with no guarantees of correctness or
fitness for purpose.
4. How do I report bugs in MaraDNS?
Please contact me; my email address is at
http://www.maradns.org/contact.html.
Please be sure to include all information requested there, including
the operating system you are using, the version of MaraDNS you are using,
your
mararc configuration file, and all relevant zone files.
5. Some of the postings to the mailing list do not talk about MaraDNS!
In cases where I post something to the mailing list which does not directly
talk about MaraDNS, the subject line will not have [MARA] in it, but will
have some form of the word CHATTER in it.
This way, people who do not like this can set up mail filters to filter out
anything that comes from this list and doesn't have [MARA] in the subject
line, or simply unsubscribe from the list and read the list from the
archives; if one needs to report a bug, they can subscribe to the list
again, post their bug, then unsubscribe after a week.
Another option is to set up one's Freshmeat preferences to be notified
in email every time I update MaraDNS at Freshmeat. This will give one
email notice of any critical bug fixes without needing to be
subscribed to the mailing list.
The web page http://www.maradns.org/
has a link to the mailing list archives.
6. How do I get off the mailing list?
Send an email to list-request@maradns.org with "unsubscribe" as the
subject line.
7. How do I set up reverse DNS on MaraDNS?
Reverse DNS (sometimes called "reverse mapping") is set up by using
PTR (pointer) records. For example, the PTR record which performs
the reverse DNS lookup for the ip 10.2.3.4 looks like this in a CSV2 zone
file:
4.3.2.10.in-addr.arpa. PTR www.example.com. ~
It is also possible, with MaraDNS 1.2.05 and more recent releases, to
use a special "FQDN4" which automatically sets up the reverse
mapping of a given record:
www.example.com. FQDN6 10.2.3.4 ~
If you wish to have a PTR (reverse DNS lookup; getting a DNS name from a
numeric IP) record work on the internet at large, it is not a simple
matter of just adding a record like this to a MaraDNS zonefile. One also
needs control of the appropriate in-addr.arpa. domain.
While it can make logical sense to contact the IP 10.11.12.13 when trying
to get the reverse DNS lookup (fully qualified domain name) for a given
IP, DNS servers don't do this. DNS server, instead, contact the root
DNS servers for a given in-addr.arpa name to get the reverse DNS lookup,
just like they do with any other record type.
When an internet service provider is given a block of IPs, they are also
given control of the DNS zones which allow them to control reverse DNS
lookups for those IPs. While it is possible to obtain a domain and run
a DNS server without the knowledge or intervention of an ISP, being
able to control reverse DNS lookups for those IPs requires ISP
intervention.
8. I am on a slow network, and MaraDNS can not process recursive
queries
MaraDNS, by default, only waits two seconds for a reply from a remote
DNS server. This default can be increased by adding a line like this
in the mararc file:
timeout_seconds = 5
Note that making this too high will slow MaraDNS down when DNS servers
are down, which is, alas, all too common on today's internet.
9. When I try to run MaraDNS, I get a cryptic
error message.
There is usually some context of where there is a syntax error in a
data file before the cryptic error message. For example, when there
is a syntax error in a csv2 zone file, MaraDNS will tell you exactly
at what point it had to terminate parsing of the zone file.
If MaraDNS does return a cryptic error message without letting you know
what is wrong, let me know
so that I can fix the bug. MaraDNS is designed
to be easy to use; cryptic error messages go against this spirit.
10. After I start MaraDNS, I can not see the process when I run netstat -na
Udp services do not have a prominent "LISTEN" when netstat is run.
When MaraDNS is up, the relevant line in the netstat output looks
like this:
udp 0 0 127.0.0.1:53 0.0.0.0:*
While on the topic of netstat, if you run netstat -nap as root
on Linux and some other *nix operating systems, you can see the names of
the processes which are providing internet services.
11. What string library does MaraDNS use?
MaraDNS uses its own string library, which is called the "js_string"
library. Man pages for most of the functions in the js_string library
are in the folder doc/man of the MaraDNS
distribution
12. Why does MaraDNS use a multi-threaded model?
The multi-threaded model is, plain and simple, the simplest way to write
a functioning recursive DNS server. There is a reason why MaraDNS, pdnsd, and
BIND 9 all use the multi-threaded model.
I am planning on improving MaraDNS' threaded model to not spawn a thread
for each and every uncached request.
13. I feel that XXX feature should be added to MaraDNS
The only thing that will convince me to implement a given feature for
MaraDNS is cold, hard cash. If you want me to keep a given feature
proprietary, you better have lots of cold hard cash. If you're willing
to opensource your feature, less cash should be sufficient.
Keep in mind that both the BIND and NSD name servers were
developed by having the programmers paid to work on the programs.
PowerDNS was originally commercial software with the author only
reluctantly made GPL after seeing that the market
for a commercial DNS server is very small. All of the other DNS servers
which have been developed as hobbyist projects (Posadis, Pdnsd, and djbdns)
are no longer being actively worked on by the primary developer.
My current plans for MaraDNS are visible on the
roadmap page for MaraDNS.
If I see a large
MaraDNS community and a strong demand for new features from that community,
I will consider their wishes. Especially if some of the members of
the community
have large bank accounts. Should ipv6 start to become dominant, I will update
MaraDNS to have full ipv6 support. Should some other technology come along
that will require an update to MaraDNS for MaraDNS to continue to function
as a DNS server, I may very well update MaraDNS to use that technology.
14. I feel that MaraDNS should use another documentation format
The reason that MaraDNS uses its own documentation format is to satisfy both
the needs of translators to have a unified document format and my own
need to use a documentation format that is simple enough to be readily
understood and which I can add features on an
as needed basis.
The documentation format is essentially simplified HTML with some
special tags added to meet MaraDNS' special needs.
This gives me more flexibility to adapt the documentation format to
changing needs. For example, when someone pointed out that it's not
a good idea to have man pages with hi-bit characters, it was a simple matter
to add a new HIBIT tag which allows man pages to be without
hi-bit characters, and other document formats to retain hi-bit characters.
Having a given program have its own documentation format is not
without precedent; Perl uses its own "pod" documentation format.
15. Is there any process I need to follow to add a patch to MaraDNS?
Yes.
Here is the procedure for making a proper patch:
- Enter the directory that the file is in, for example
maradns-1.2.00/server
- Copy over the file that you wish to modify to another file
name. For example: cp MaraDNS.c MaraDNS.c.orig
- Edit the file in question, e.g: vi MaraDNS.c
- After editing, do something like this:
diff -u MaraDNS.c.orig MaraDNS.c > maradns.patch
- Make sure the modified version compiles cleanly
Send a patch to me in email, along with a statement that you place
the contents of the patch under MaraDNS' BSD license. If I find that the patch
works well, I will integrate it in to MaraDNS.
16. Can MaraDNS act as a primary nameserver?
Yes.
The zoneserver program serves zones so that other DNS servers
can be secondaries for zones which MaraDNS serves. This is a separate
program from the maradns server, which processes both
authoritative and recursive UDP DNS queries.
See the DNS
master document in the MaraDNS tutorial for details.
17. Can MaraDNS act as a secondary nameserver?
Yes.
Please read the
DNS slave document, which is part of the MaraDNS tutorial.
18. What is the difference between an authoritative and a recursive DNS
server?
A recursive DNS server is a DNS server that is able to contact other DNS
servers in order to resolve a given domain name label. This is the kind
of DNS server one points to in
/etc/resolve.conf
An authoritative DNS server is a DNS server that a recursive server
contacts in order to find out the answer to a given DNS query.
19. The fetchzone client isn't allowing me to add certain hostnames to
my zone
For security reasons, MaraDNS' fetchzone client does not
add records which are not part of the zone in question. For example,
if someone has a zone for example.com, and this record in the zone:
1.1.1.10.in-addr.arpa. PTR dns.example.com.
MaraDNS will not add the record, since the record is out-of-bailiwick. In
other words, it is a host name that does not end in .example.com.
There are two workarounds for this issue:
- Create a zone file for 1.1.10.in-addr.arpa., and put the PTR records
there.
- Use rcp, rsync, or another method to copy over the zone files in
question.
20. Is MaraDNS portable?
MaraDNS is developed on a CentOS 3 and Windows XP dual boot laptop.
MaraDNS may compile or run on other systems--there are official MaraDNS
ports for Debian/Ubuntu, Slackware, FreeBSD, and NetBSD. Note that MaraDNS
needs a system with a robust threading library, which some systems do not
have.
21. Can I use MaraDNS in Windows?
Yes. There is both a partial mingw32 (native win32 binary) port and a full
Cygwin port of MaraDNS; both of these ports are part of the native build
of MaraDNS.
22. MaraDNS freezes up after being used for a while
If you are using MaraDNS 1.2.03.1 (or any 1.1 release, for that matter) on
Linux, upgrade to version 1.2.03.2. There is a bug with the Linux kernel
which causes UDP clients to freeze unless code is written to work around
the kernel bug. This workaround was first introduced in MaraDNS 1.0.28
and 1.1.35 and accidently disabled in 1.2.03.1.
If using your ISP's name servers or some other name servers which
are not, in fact, root name servers, please make sure that you are
using the upstream_servers dictionary variable instead of the
root_servers dictionary variable.
If you still see MaraDNS freeze up after making this correction, please
send a bug report to the mailing list.
23. What kind of Python integration does MaraDNS have
The mararc file uses the same syntax that Python uses; in fact, Python
can parse a properly formatted mararc file.
There is currently no other integration with Python.
24. Doesn't "kvar" mean "four" in Esperanto?
Indeed, it does. However the use of "kvar" in the MaraDNS source
code only coincidentally is an Esperanto word. "kvar" is short
for "Kiwi variable"; a lot of the parsing code comes from the code
used in the Kiwi spam filter project.
25. How scalable is MaraDNS?
MaraDNS is optimized for serving a small number of domains as quickly
as possible. That said, MaraDNS is remarkably efficnent for serving a
large number of domains, as long as the server MaraDNS is on has the
memory to fit all of the domains, and as long as the startup time for
loading a large number of domains can be worked around.
The "big-O" or "theta" growth rates for various MaraDNS functions
are as follows, where N is the number of authoritative host names being
served:
Startup time N
Memory usage N
Processing incoming DNS requests 1
As can be seen, MaraDNS will process 1 or 100000 domains in the same amount
of time, once the domain names are loaded in to memory.
26. I am having problems setting upstream_servers
The
upstream_servers mararc variable is set thusly:
upstream_servers["."] = "10.3.28.79, 10.2.19.83"
Note the
["."]. The reason for this is so future versions
of MaraDNS may have more fine-grained control over the
upstream_servers and
root_servers values.
Note that the upstream_servers variable needs to be initialized
before being used via upstream_servers = {} (the reason for this
is so that a mararc file has 100% Python-compatible syntax). A complete
mararc file that uses upstream_servers may look like this:
ipv4_bind_addresses = "127.0.0.1"
chroot_dir = "/etc/maradns"
recursive_acl = "127.0.0.1/8"
upstream_servers = {}
upstream_servers["."] = "10.1.2.3, 10.2.4.6"
27. Why doesn't the MaraDNS.org web page validate?
HTML pages on the MaraDNS.org web site should validate as
HTML 4.0 Transitional. However, the CSS will not validate.
I have designed MaraDNS' web page to be usable and as attractive as possible
in any major browser released in the last ten years. Cross-browser support
is more important than strict W3
validation. The reason why the CSS does not validate is because
I need a way to make sure there is always a scrollbar on the web page,
even if the content is not big enough to merit one; this is to avoid the
content jumping from page to page. There is no standard
CSS tag that lets me do this. I'm using a non-standard tag to enable
this in Gecko (Firefox's rendering engine); this is enabled by default in
Trident (Internet Explorer's rendering engine). The standards are deficient
and blind adherence to them would result in an inferior web site.
There are also two validation warnings generated by redefinitions which
are needed as part of the CSS filters used to make the site attractive on
older browsers with limited CSS support.
On a related note, the reason why I use tables instead of CSS for some of
the layout is because Microsoft Internet Explorer 6 and other browsers do
not have support for the max-width CSS property. Without this
property, the web page will not scale down correctly without using tables.
Additionally, tables allow a reasonably attractive header in browsers
without CSS support.
28. How do MX records work?
How MX records work:
- The mail transport agent (Sendmail, Postfix, Qmail, MS Exchange, etc.)
looks up the MX record for the domain
- For each of the records returned, the MTA (mail transport agent) looks
up the IP for the names.
- It will choose, at random, any of the MXes with the lowest priority number.
- Should that server fail, it will try another server with the same
priority number.
- Should all MX records with a given priority number fail, the MTA will
try sending email to any of the MX records with the second-lowest
priority value.
As an aside, do not have MX records point to CNAMEs.
29. Does MaraDNS have support for SPF?
SPF, or sender policy framework, is method of using DNS that makes
it more difficult to forge email. MaraDNS has full support for SPF,
both via TXT records and, starting with MaraDNS 1.2.08, via RFC4408
SPF records.
SPF configuration is beyond the scope of MaraDNS' documentation. However,
at the time of this FAQ entry being written (June, 2006), information
and documentation concerning SPF is available at
http://openspf.org. The BIND examples
will work in MaraDNS csv2 zone files as long as the double quotes (") are
replaced by single quotes ('). For example, a SPF TXT record that
looks like example.net. IN TXT "v=spf1 +mx a:colo.example.com/28 -all"
in a BIND zone file will look like
example.net. TXT 'v=spf1 +mx a:colo.example.com/28 -all' in a
MaraDNS zone file. MaraDNS version 1.2.08 and higher can also make
the corresponding SPF record, which will have the syntax
example.net. SPF 'v=spf1 +mx a:colo.example.com/28 -all'.
30. I'm having problems resolving CNAMES I have set up.
This is probably because you have set up what MaraDNS calls a dangling CNAME
record.
Let us suppose we have a CNAME record without an A record in the local
DNS server's database, such as:
google.example.com. CNAME www.google.com. ~
This record, which is a CNAME record for "google.example.com", points
to "www.google.com". Some DNS servers will recursively look up
www.google.com, and render the above record like this:
google.example.com. CNAME www.google.com. ~
www.google.com. CNAME 66.102.7.104 ~
For security reasons, MaraDNS doesn't do this. Instead, MaraDNS will simply
output:
google.example.com. CNAME www.google.com. ~
Some stub resolvers will be unable to resolve google.example.com as
a consequence.
If you set up MaraDNS to resolve CNAMEs thusly, you will get a warning
in your logs about having a dangling CNAME record.
If you want to remove these warnings, add the following to your mararc file:
no_cname_warnings = 1
Information about how to get MaraDNS to resolve dangling CNAME
records is in the tutorial file dangling.html
I have a NS delegation, and MaraDNS is doing
strange things.
In the case of there being a NS delegation, MaraDNS handles recursive
queries and non-recursive DNS queries differently. Basically, unless
you use
askmara with the
-n option, dig with the
+norecuse option, or
nslookup with the
-norec
option, MaraDNS will try to recursively resolve the record that is
delegated.
The thinking is this: A normal recursive DNS query is usually one
where one wants to know the final DNS output. So, if MaraDNS
delegates a given record to another DNS server, and gets a recursive
request for said query, MaraDNS will recursively resolve the query
for you.
For example, let us suppose we have a mararc file that looks
like this:
chroot_dir = "/etc/maradns"
ipv4_bind_addresses = "10.1.2.3"
chroot_dir = "/etc/maradns"
recursive_acl = "127.0.0.1/8, 10.0.0.0/8"
csv2 = {}
csv2["example.com."] = "db.example.com"
And a
db.example.com file that looks like this:
www.example.com. 10.1.2.3 ~
joe.example.com. NS ns.joe.example.com. ~
ns.joe.example.com. A 10.1.2.4 ~
Next, you are trying to find out why www.joe.example.com is not
resolving. If you naively send a query to 10.1.2.3 for www.joe.example.com
as
askmara Awww.joe.example.com. 10.1.2.3 or as
dig @10.1.2.3 www.joe.example.com. or as
nslookup www.joe.example.com. 10.1.2.3, you will
not
get any information that will help you solve the problem, since 10.1.2.3
will try to contact 10.1.2.4 to resolve www.joe.example.com.
The solution is to run your DNS query client thusly:
- Askmara would be run thusly:
askmara -n Awww.joe.example.com. 10.1.2.3
- Dig would be run thusly:
dig +norecurse @10.1.2.3 www.joe.example.com
- Nslookup would be run thusly:
nslookup -norec www.joe.example.com 10.1.2.3
This will allow you to see that packets MaraDNS actually sends to
a recursive DNS server.
As an aside, this particular problem will not happen if MaraDNS is
run only as an authoritative nameserver.
I am transferring a zone from another
server, but the NS records are these strange "synth-ip" records.
MaraDNS expects, in csv2 zone files, for all
delegation NS records to be between the SOA record and the first
non-NS record.
If a zone looks like this:
example.net. +600 soa ns1.example.net. hostmaster@example.net
10 10800 3600 604800 1080 ~
example.net. +600 mx 10 mail.example.net. ~
example.net. +600 a 10.2.3.5 ~
example.net. +600 ns ns1.example.net. ~
example.net. +600 ns ns3.example.net. ~
mail.example.net. +600 a 10.2.3.7 ~
www.example.net. +600 a 10.2.3.11 ~
Then the NS records will be "synth-ip" records.
The zone should look like this:
example.net. +600 soa ns1.example.net. hostmaster@example.net
10 10800 3600 604800 1080 ~
example.net. +600 ns ns1.example.net. ~
example.net. +600 ns ns3.example.net. ~
example.net. +600 mx 10 mail.example.net. ~
example.net. +600 a 10.2.3.5 ~
mail.example.net. +600 a 10.2.3.7 ~
www.example.net. +600 a 10.2.3.11 ~
This will remove the "synth-ip" records.
To automate this process, this awk script is useful:
fetchzone whatever.zone.foo 10.1.2.3 | awk '
{if($3 ~ /ns/ || $3 ~ /soa/){print}
else{a = a "\n" $0}}
END{print a}' > zonefile.csv2
Replace "whatever.zone.foo" with the name of the zone you are
fetchin 10.1.2.3 with the IP address of the DNS master, and
zonefile.csv2 with the name of the zone file MaraDNS loads.
Where is the root.hints file?
MaraDNS, unlike BIND, does not need a complicated root.hints file in
order to have custom root servers. In order to change the root.hints
file, add something like this to your mararc file:
root_servers["."] = "131.161.247.232,"
root_servers["."] += "208.185.249.250,"
root_servers["."] += "66.227.42.140,"
root_servers["."] += "66.227.42.149,"
root_servers["."] += "65.243.92.254"
Note that there is no "+=" in the first line, and the last line does not
have a comma at the end. Read the recursive tutorial document for more
information.
Are there any plans to use autoconf to build
MaraDNS?
No. OK, let me qualify that: I won't do it unless you pay
me enough money.
In more detail, MaraDNS does not use autoconf for the following reasons:
- Autoconf is designed to solve a problem that existed in the mid 1990s
but does not exist today: A large number of different incompatible C
compilers and libc implementations. These days, most systems are using
gcc as the compiler and some version of glibc as the libc. There is
no longer a need, for example, to figure out whether a given
implementation of getopt() allows '--' options.
MaraDNS's ./configure script can be run in only a second or
two; compare this to the 3-5 minute process autoconf's ./configure
needs.
- Autoconf leaves GPL-tained files in a program's build tree. MaraDNS is
licensed under a BSD license that is not GPL-compatible, so
MaraDNS can not be distributed with these GPL-licensed files.
This leads us to the next question:
How do I change the compiler or compile-time flags
with MaraDNS' build process?
To change the compiler used by MaraDNS:
- Run the ./configure script
- Open up the file Makefile with an editor
- Look for a line that starts with CC
- If there is no line that starts with CC, create one just before
the line that starts with FLAGS
- Change (or create) that line to look something like CC=gcc296
In this example, the 2.96 version of gcc is used to compile MaraDNS.
- Note that it is important to not remove anything from this line
you do not understand; doing so will make MaraDNS unable to compile
or run. So, if the CC line looks like
CC=gcc $(LDFLAGS) -DNO_FLOCK and you want to compile
with gcc 2.96, change the line to look like
CC=gcc296 $(LDFLAGS) -DNO_FLOCK retaining the flags
added by the configuration script.
Changing compile-time flags is a similar process:
- Run the ./configure script
- Open up the file Makefile with an editor
- Look for a line that starts with FLAGS
- Change (or create) that line to look something like FLAGS=-O3
In this example, MaraDNS is compiled with the -O3 option.
- Note that it is important to not remove anything from this line
you do not understand; doing so will make MaraDNS unable to compile
or run. So, if the FLAGS line looks like
FLAGS=-O2 -Wall -DSELECT_PROBLEM and you want to compile
at optimization level three, change this line to look like
FLAGS=-O2 -Wall -DSELECT_PROBLEM retaining the flags
added by the configuration script. -DSELECT_PROBLEM for example,
is needed in the Linux compile or MaraDNS will have problems with
freezing up.
Will you make a package for the particular Linux
distribution I am using?
No. OK, let me qualify that: I won't do it unless you pay
me enough money.
There are MaraDNS packages for a number of different distributions of
Linux and other operating systems. On the MaraDNS site, there is
a MaraDNS package for CentOS/Red Hat Enterprise Linux available. There
is also usually an up-to-date Slackware package available. In addition,
there is a Debian package in the Debian packages collection, a FreeBSD
port of MaraDNS, a Ubuntu package which is derived from the Debian package,
and undoubtably other MaraDNS packages floating around the internet.
If you wish to have a package for your particular version of Linux (or
MacOS X or BSD or...), you can use one of the above packages as a starting
point for making your package. For example, other RPM-based distributions
can use the CentOS RPM package as a baseline (the .spec file is in the
build/ directory). I can not help you with any problems you
may encounter making this package since I do not have your particular
version of Linux installed on my computer.
As an aside, some of the MaraDNS packages floating around on the internet
are out of date. Please make sure, that if you get a third-party package
from the internet, the package is for either MaraDNS 1.0.40, MaraDNS
1.2.12.05, or MaraDNS 1.3.04. Older versions of MaraDNS are not
supported.
I am using the native Windows port of MaraDNS,
and some features are not working.
Since Windows 32 does not have some features that *NIX OSes have, the native
Windows port does not have all of the features of the *NIX version of
MaraDNS. In particular, the following features are disabled:
- ipv6 (this is actually a mingw32, not a Windows deficiency)
- The chroot_dir mararc variable
- The maradns_gid and maradns_uid mararc variables
- The maxprocs mararc variable
- The synth_soa_serial can not have a value of 2
If any of the above features are desired, try compiling MaraDNS using
Cygwin. Note that the Cygwin port of MaraDNS does not have ipv6 support,
and that while
chroot_dir works in Cygwin, it does not have
the security that the *NIX chroot() call has.
MaraDNS isn't starting up
This is usually caused by a syntax error in one's mararc file, or by
another MaraDNS process already running. To see what is happening, look
at your system log (
/var/log/messages in Centos 3) to see what
errors MaraDNS reports. If you do not know how to look at a system
log, you can also invoke MaraDNS from the command line as root; any errors
will be visible when starting MaraDNS.
You make a lot of releases of MaraDNS; at our
ISP/IT department, updating software is non-trivial.
The number of releases seen in the
changelog
is not an accurate reflection of how often someone using a stable
branch of MaraDNS will need to update.
There were only three updates to the 1.0 legacy branch in 2006. The 1.2 branch
was updated frequently in the first half of 2006, since I felt MaraDNS 1.2
needed some features that didn't make it in to 1.2.00. During this update
cycle, there was always a stable bugfix-only branch of MaraDNS.
In August of 2006, I stabilized the 1.2 branch and only three updates
have been done since then. Unless there is a critical bug, I only update
the 1.2 branch approximately once every three months or so.
go to a great deal of effort to make sure MaraDNS releases are as
painless to update as possible. I ensure configuration file format
compatibility, even between major versions of MaraDNS. With the exception
of configuration file parser bugfixes, MaraDNS 1.0 configuration files
are compatible with MaraDNS 1.2 and 1.3.
It is impossible to make code that is bug-free or without security
problems. This is especially true with code that runs on the public
internet.1 Code has to be updated from
time to time. What I do in order to minimize the disruption caused by an
update is to always have a stable bugfix-only branch of MaraDNS (right now I
have two bugfix-only branches), and to, as much as possible, evenly
space out the bugfix updates.
Footnote 1: Even DJB's code has security problems. Both Qmail and DjbDNS
have known security problems, and need to be patched before put on a public
internet server.